TY - JOUR ID - TI - Energy Analysis of Solar Collector With perforated Absorber Plate تحليل الطاقة لمجمع شمسي ذو صفيحة امتصاص مثقبة AU - Hana Abdulhussien Sahi هناء عبد الحسين ساهي AU - Ammar Ali Farhan عمار علي فرحان PY - 2017 VL - 23 IS - 9 SP - 89 EP - 102 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The thermal performance of three solar collectors with 3, 6 mm holes and without perforation absorber plate was experimentally assessed. The experimental tests were implemented in Baghdad during January and February 2017. Five values of airflow rates range between 0.01 – 0.1 m3/s were used through the test with a constant airflow rate during the test day. The variation of the following parameters was recorded every 15 minutes air temperature difference, useful energy, absorber plate temperature, and collector efficiency. The experimental data reported that the number of absorber plate perforations with a small diameters is more efficient than increasing the hole diameters of the absorber plate with decreasing the perforation numbers. The maximum air temperature difference throughout the solar collector with 3, 6 mm perforations and without perforations were 17, 15, and 12 oC, respectively. Also, it can be conclude that the energy gained from the solar collector with 3 mm perforation absorber plate is 28.2 % higher than the energy gained from solar collector without holes per day for 0.1 m3/s airflow rate. The maximum values of the thermal performance curves were 67 %, 64 %, and 56 % for the solar collector with 3, 6 mm, and without perforations, respectively.

تم تقييم الأداء الحراري عملياً لثلاثة مجمعات شمسية ذات لوح امتصاص تحتوي على ثقوب 3 و 6 ملم وبدون ثقوب. اجريت الاختبارات التجريبية في بغداد خلال شهري كانون الثاني وشباط لعام 2017. تم استخدام خمسة قيم لمعدلات تدفق الهواء تتراوح بين 0.01 - 0.1 م 3 ثانية خلال التجارب مع معدل تدفق هواء ثابت خلال الاختبار الواحد. تم تسجيل بيانات العناصر الآتية كل 15 دقيقة: الفرق في درجة حرارة الهواء، الطاقة المفيدة، درجة حرارة لوح الامتصاص، وكفاءة المجمع. اثبتت البيانات العملية أن زيادة عدد ثقوب لوح الامتصاص مع قطر صغير هو أحسن كفاءة من قطر كبير وعدد قليل من الثقوب في لوح الامتصاص. أقصى فرق في درجة حرارة الهواء خلال المجمع الشمسي ذو لوح امتصاص يحتوي على ثقوب 3 و 6 ملم وبدون ثقوب كانت 17، 15، و 12 درجة مئوية، على التوالي. أيضا، يمكن استنتاج أن الطاقة المكتسبة من المجمع الشمسي ذو لوح امتصاص يحتوي على ثقوب 3 ملم هي أكثر من الطاقة المكتسبة من المجمع الشمسي ذو لوح امتصاص بدون ثقوب بمقدار 28.2 ٪ في اليوم لمعدل تدفق هواء بمقدار 0.1 م 3 ثانية. كانت القيم القصوى لمنحنيات الأداء الحراري هي %67، %64، و % 56 لمجمع الشمسي ذو لوح امتصاص يحتوي على ثقوب 3 و 6 ملم وبدون ثقوب ، على التوالي. ER -