TY - JOUR ID - TI - Comparison the Physical and Mechanical Properties of Composite Materials (Al /SiC and Al/ B4C) Produced by Powder Technology مقارنة الخواص الفيزياوية والميكانيكية لمواد مركبة (المنيوم/ كاربيد السليكون، المنيوم/ كاربيد البورون) منتجة بطريقة تكنولوجيا المساحيق AU - Khansaa Dawood Salman خنساء داود سلمان PY - 2017 VL - 23 IS - 10 SP - 85 EP - 96 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - In this investigation, metal matrix composites (MMCs) were manufactured by using powder technology. Aluminum 6061 is reinforced with two different ceramics particles (SiC and B4C) with different volume fractions as (3, 6, 9 and 12 wt. %). The most important applications of particulate reinforcement of aluminum matrix are: Pistons, Connecting rods etc. The specimens were prepared by using aluminum powder with 150 µm in particle size and SiC, B4C powder with 200 µm in particle size. The chosen powders were mixed by using planetary mixing setup at 250 rpm for 4hr.with zinc stearate as an activator material in steel ball milling. After mixing process the powders were compacted by hydraulic unidirectional press type (Leybold Harris No. 36110) at 250 Kg/cm2 according to (ASTM-D 618). Finally the green compacts were sintered at 500 ℃ for 3 hr. by using electrical furnace with argon atmosphere. There are many examinations and tests were done for the produced metal matrix composites (MMCS), (Al/ SiC and Al/B4C) such as examination of the microstructure, mechanical tests (hardness and compressive strength), physical tests (density test before and after sintering, also porosity test). The results of this investigation showed that improving the physical properties (theoretical density, experimental density, porosity) and mechanical properties (Rockwell hardness and compressive strength).

في هذا البحث تم تصنيع مادة مركبة بطريقة تكنولوجيا المساحيق. تمت تقوية الألمنيوم 6061 بنوعين مختلفين من الدقائق السيراميكية ( كاربيد السليكون ، كاربيد البورون) بنسب حجمية مختلفة 3، 6، 9، و12 % . من أهم تطبيقات التقوية بالدقائق لأرضية من الألمنيوم هي: المكابس، أذرع التوصيل . . الخ. تم تحضير العينات بأستخدام مسحوق الألمنيوم بحجم حبيبي 150 مايكرون ومساحيق كاربيد السليكون و كاربيد البورون بحجم حبيبي 200 مايكرون. تم خلط المساحيق المستخدمة باستخدام خلاط كوكبي بسرعة 250 دورة / دقيقة لمدة 4 ساعات مع مادة سترات الزنك كمادة منشطة مع كرات طحن من الفولاذ. بعد عملية الخلط تم تدميج المساحيق بمكبس هيدروليكي أحادي الأتجاه نوع (Leybold Harris No. 36110) بمقدار 250 كغم/ سم2 بموجب المواصفة (ASTM-D 618). أخيرآ تم تلبيد المدمجات الخضراء عند درجة حرارة 500مo لمدة 3 ساعات بأستخدام فرن كهربائي في جو من الآركون. أجريت العديد من الأختبارات والفحوصات للمواد المركبة المنتجة (ألمنيوم / كاربيد السليكون ، ألمنيوم/ كاربيد البورون ) مثل فحص البنية المجهرية ، أختبارات الصلادة ومقاومة الضغط، أختبارات الكثافة قبل وبعد التلبيد، كذلك أجري أختبار المسامية. أظهرت نتائج هذا البحث تحسن واضح في الخواص الفيزياوية (الكثافة النظرية ، الكثافة التجريبية، المسامية ) والخواص الميكانيكية (صلادة روكويل، مقاومة الأنضغاط). ER -