@Article{, title={TORSIONAL STRENGTHENING OF PRESTRESSED SELF COMPACTING CONCRETE BOX BEAMS USING INTERNAL TRANSVERSE CONCRETE DIAPHRAGMS TECHNIQUE}, author={Ali Hameed Aziz1 and Oday Habeeb Hashim}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={21}, number={5}, pages={129-143}, year={2017}, abstract={In the present paper, new technique by adding internal concrete diaphragms, in transverse direction, for prestressed self-compacting concrete box beams is adopted. Six SCC beam specimens have a dimension of (2200x220x350mm) for length; width and height, respectively were poured and tested. Three variables were adopted in present study; section type (Box or Solid), number of diaphragms (None, Two and Four), and type of diaphragms (Opened and Closed). Experimental results showed that the ultimate torque moment increases about (58.6%-72.4%) and (120.7%-127.6%) for beam specimens strengthened internally by two and four diaphragms, respectively. Also, increasing of internal diaphragms from two to four, led to increase the ultimate torque moment about (55.2%-62.1%). Furthermore, the change of section from box section with four internal diaphragms to solid section, led to increase in ultimate torque moment about (48.3%-55.2%). The paper conclude that the increasing in torsional capacity was attainable for box beams by using the technique of strengthening by internal diaphragms; Also, the box sections can be made with internal opened diaphragms and possess same capacity or contribution of the closed ones.

في هذا البحث، تقنية اضافة حواجب خرسانيه داخليه مستعرضه ( في الاتجاه العرضي) للعتبات الخرسانية ذاتية الرص الصندوقيه المسبقة الجهد تم اعتمادها. ستة عتبات مصنوعه من الخرسانه المسبقة الجهد الذاتية الرص بأبعاد (350x220x2200 ملم) للطول، العرض والارتفاع على التوالي تم صنعها واختبارها. تم اعتماد ثلاثة متغيرات، نوع مقطع العتبه (صلد او صندوقي)، عدد الحواجب الخرسانيه الداخليه المستعرضه(بدون، اثنان و اربعة) ونوع الحواجب الخرسانيه الداخليه (صلده او مفتوحه). اظهرت النتائج المختبريه أن عزم اللي الاقصى زاد بمقدار (58.6٪-72.4٪) و (127.6٪ -120.7٪) للنماذج المقواة داخليا بحاجبين وأربعة حواجب على التوالي. كما أن زيادة عدد الحواجب الداخليه من اثنين إلى أربعة، أدى إلى زيادة عزم اللي الاقصى بمقدار(55.2٪ -62.1٪). اضافة الى ذلك، فإن تغيير نوع العتبه من عتبه صندوقيه ذات أربعة حواجب الى عتبه صلده، أدى إلى زيادة في عزم اللي الاقصى بمقدار(48.3٪ -55.2٪). خلصت الدراسة الى ان الزيادة في سعة المقطع لمقاومة اجهادات اللي ممكن تحقيقها في العتبات الخرسانيه المسلحه الصندوقيه باستخدام تقنية التقويه بالحواجب الخرسانيه الداخليه. كذلك، من الممكن عمل عتبات خرسانيه صندوقيه مقواة بحواجب خرسانيه مفتوحه تمتلك نفس قدرة أو مساهمة الحواجب المغلقه (الصلده).} }