@Article{, title={EXPERIMENTAL STUDY OF TEMPERATURE EFFECT AND CURING TIME ON THE SHEAR STRENGTH OF ADHESIVE JOINTS BY POLYVINYL PYRROLIDONE PVP K30 دراسة عملية لتأثير درجة الحرارة ووقت المعالجة على مقاومة القص للوصلات الملصوقة بواسطة البولي فينيل بروليدون PVP K30}, author={Abbas Ali Diwan عباس علي ديوان and Abdul Kareem F. Hassan عبد الكريم فليح حسن and Sabah M. Thahab صباح مريسن ضهاب}, journal={KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية}, volume={8}, number={2}, pages={53-66}, year={2017}, abstract={This research represents an experimental work to study the effect of temperature and curing time on the shear strength of adhesive joints by polyvinyl pyrrolidone PVP k30. In this work, shear strength of the adhesive made from dissolving 8 grams of polyvinyl pyrrolidone (k30) in 50 ml of ethanol alcohol high purity 99.9% was studied. This study focused on the effect of temperature and curing time under pressure of a fixed rate of 5 MPa. Therefore, the effect of five temperatures (200, 215, 225, 235 and 250) °C for different times (10, 20 and 30) minutes under the influence of the same pressure in all cases was studied by taking pictures of samples using Scanning Electron Microscope (SEM). It was inferred that the best resistance obtained at a temperature of 225 °C and time of 10 minutes, reaching overhead hanging to 1669 N, that there is an increase in the resistance of the adhesive with the increase in temperature and up to 225 °C, and then there is a decrease in the resistance and up to 250 °C at the time of 10 minutes.

. PVP K30يمثل هذا البحث عمل تجريبي لدراسة تأثير درجة الحرارة وزمن المعالجة على مقاومة القص الملتصقة بمادة 8 في هذا العمل تمت دراسة مقاومة القص للمادة اللاصقة المصنوعة من اذابة K30 غرام من البولي فينيل بايرولدين .%ركزت هذه الدراسة على تأثير درجات الحرارة وزمن التسخين 99.9 ملليتر من كحول الايثانول عالي النقاوة 50 في 200 ( ميجا باسكال وتم دراسة تأثير خمس درجات حرارة وهي 5 على مقاومة المادة اللاصقة و تحت ضغط ثابت مقداره , دقيقة تحت تأثير نفس الضغط في جميع الحالات 30 و 20 و 10 )درجة مئوية لأزمنة مختلفة هي 215, 225, 235, 250 تم استنتاج ان افضل مقاومة حصلت عند درجة ، كما تم التقاط صور لعينات مجهرية بواسطة المجهر الماسح الالكتروني نيوتن، ان هناك زيادة في مقاومة المادة 1669 دقيقة حيث وصل مقدار الحمل المسلط الى 10 مئوية ووقت 225 حرارة درجة مئوية عند 250 درجة مئوية ومن ثم هناك نقصان في المقاومة ولغاية 225 اللاصقة مع زيادة درجة الحرارة ولغاية دقيقة 10 زمن .} }