@Article{, title={Mechanical Properties And Flexural Behavior of reinforced Polymer Modified Concrete beams enhanced by Waste Plastic Fibers (WPF) الخواص الميكانيكية وسلوك الانحنا للخرسانة المحورة بالبوليمر والمعززة بالياف الفضلات البلاستيكية}, author={Dr.Abdulkader Ismail Al- Hadithi1 عبدالقادر اسماعيل الحديثي and Shahad Younus Thabet Al-Waysi}, journal={Iraqi Journal of Civil Engineering المجلة العراقية للهندسة المدنية}, volume={11}, number={2}, pages={16-32}, year={2017}, abstract={This research include the study of flexural behavior of polymer modified concrete beams containing waste plastic fiber (WPF). Fifteen reinforced concrete beams are moulded of (100*150*1300) mm dimension with different steel reinforcement ratio (ρ). These steel reinforcement ratio were (0.0038, 0.0207 & 0.0262). Styrene Butadine Rubber (SBR) was added as cement replacement by weight equal to (5%). Reinforced concrete beams classified in to five groups, each contains three beams with different (ρ) value. The first group conducted of reference concrete mix , the second group made with SBR modified concrete, while the three remaining groups were make by PMC containing (WPF) with volumetric ratio equal to (0.75, 1.25 & 1.75)%.This study includes compressive and flexural tests for concrete which was used in this research, load deflection relationships, the moment at mid-span with deflection and ductility were established.The results prove that, polymer modified concrete wich content waste plastic fiber has compressive and flexural strengths more than reference mixes as well as the PMC beams wich content waste plastic fiber have a stiffer response in terms of structural behaviour, more ductility and lower cracking deflection than those made by reference concretes and that refer to good role of styrene Butadiene Rubber (SBR) polymer and plastic fiber on the properties and behaviour of reinforced concrete beams.

يتضمن هذا البحث دراسة السلوك الانشائي للعتبات الخرسانية المطورة بالبوليمر والمزودة بألياف الفضلات البلاستيكية. حيث تم صب 15 عتبة خرسانية بابعاد (1300*100 *150) ملم بنسب تسليح مختلفة (ρ). وهذه النسب كانت (0.003, 0.0207,0.0262). تم اضافة بوليمر ستايرين بيوتادين ربر( (SBRبنسبة 5% من وزن الاسمنت. العتبات الخرسانية المسلحة قسمت الى خمس مجاميع, كل مجموعة تحتوي على ثلاث عتبات بتلاث نسب تسليح مختلفة (ρ). المجموعة الاولى تمثل الخلطة المرجعية, والمجموعة الثانية معدلة ببوةليمر ,(SBR) بينما المجاميع الثلاثة المتبقية اعدت من الخرسانة المعدلة بالبوليمر وحاوية على الياف بلاستيكية بنسب حجمية مساوية ل (0.75, 1.25, 1.75)%. تضمنت الدراسة اجراء فحوصات مقاومة الانضغاط والانثناء للخرسانة موضوع البحث, فحص العتيات للانثناء ومن ثم ايجاد علاقات (الحمل- الأود), العلاقة مابين العزم والأود في منتصف العتبة والمطيلية. أثبتت النتائج ان الخرسانة المعدلة بالبوليمر والحاوية على نسبة معينة من الياف بلاستيكية ذات مقاومة انضغاط وانثناء اعلى مقارنة بالخرسانة المرجعية وأظهرت العتبات الخرسانية المسلحة المعدلة بالبوليمر والحاوية على الياف بلاستيكية تصرفا اكثر صلابة , أكثر مطيلية وأقل أود من مثيلاتها المصنعة من الخرسانة المرجعية مما يدل على تأثير بوليمر الستايرين بيوتادين ربر((SBR ودور الالياف المهم في تحسين خواص وسلوك العتبات الخرسانية المسلحة.} }