TY - JOUR ID - TI - Removal of Orthotolidine from Aqueous Solution Using Activated Carbon Synthesized from Heavy Crude Oil Waste إزالةالاورثوتولدين من محاليلها المائية باستخدام الكاربون المنشط المحضر من المخلفات النفطية الثقيلة. AU - Ahmed Mishaal Mohammed أحمد مشعل محمد* AU - Abdul-Jabbar A. Ali عبد الجبار عباس علي AU - Ibrahim A. Abdulqadir إبراهيم عبد الحميد عبد القادر PY - 2016 VL - 10 IS - 3 SP - 83 EP - 92 JO - Journal of university of Anbar for Pure science مجلة جامعة الانبار للعلوم الصرفة SN - 19918941 27066703 AB - In this research, activated carbon (A.C) and non-activated carbon (N.A.C) have been produced from heavy crude oil waste by distillation operations, carbonization and activation. Anhydrous zinc chloride (ZnCl2) (10% W/V) have been used for activation process with temperature of (500) ºC.Adsorption processes of Orthotolidine on the surface of (A.C) and (N.A.C) have been studied at (pH = 7) with various periods for contact (10-120) minutes and with temperatures of (283, 293, 303, 313) K, using solutions of (50, 100, 150, 200) mg L versus grain size of carbon (Mesh 70). The results showed that the percentage of adsorption increases with increasing of temperature and contact time.The highest percentage of adsorption of Orthotolidine reached to (99.00) %, using (A.C) and solutions of (100 mg L) concentration at contact time of (120 minutes) and temperature of (313 K), whereas a higher percentage of adsorption of Orthotolidine reached to (97.36) %, using (N.A.C) at the same previous conditions.Equations of Frendlich, Langmuir and Temkin have been applied on the adsorption processes. The results showed that all of the equations fit with adsorption processes according to correlation factor values (R2). The thermodynamic functions have been calculated. Values of (ΔGº) showed that the adsorption processes were spontaneous. Values of (ΔHº) showed that the adsorption processes were chemisorption and endothermic.

تم في هذه البحث انتاج الكاربون المنشط (A.C) وغير المنشط (N.A.C) من المخلفات النفطية الثقيلة بعمليات التقطير والكربنة والتنشيط، واستخدمت مادة كلوريد الخارصين اللامائي(ZnCl2)(10% W/V) في عملية التنشيط بدرجة حرارة (500) ºم، وتم دراسةعملية امتزاز الاورثوتولدين على سطح (A.C) و(N.A.C) عند (pH=7) وبأزمان مختلفة (10-120) دقيقة وبدرجات حرارية مختلفة(283، 293، 303 ، 313) مطلقة باستخدام محاليل بتراكيز (50، 100، 150،200)ملغم لتر مقابل كاربون ذو حجم حبيبي (Mesh70). وقد اظهرت النتائج ان نسبة الامتزاز تزداد مع زيادة درجة الحرارة وزمن التماس حيث بلغت اعلى نسبة امتزاز للاورثوتولدين(99.00) % مع (A.C)وتركيز (100) ملغم لتر بزمن تماس (120 دقيقة) ودرجة حرارة (313) مطلقة، في حين بلغت (97.36) % باستخدام (N.A.C) عند الظروف السابقة نفسها، وتم تطبيق معادلات فريندلشولانكماير وتمكن على عمليات الامتزاز، واظهرت النتائج انطباق المعادلات جميعها على عمليات الامتزاز من خلال قيم معامل الارتباط (R2)،وتم حساب الدوال الثرموديناميكيةاذبينتقيم (∆Gº)أن عمليات الامتزاز تلقائية، واظهرت قيم (∆Hº) بان الامتزاز الحاصل كيميائي وماص للحرارة . ER -