TY - JOUR ID - TI - The effect of Laser Shock Peening on Fatigue Life Using Pure Water and Hydrofluoric Acid As a Confining Layer of Al – Alloy 7075-T6 تأثير السفع بالليزر على عمر الكلال باستخدام ماء نقي وحامض الهيدروفلوريك كطبقة حاجزة لسبيكة AU - Shaker Sakran Hassan شاكر سكران حسن AU - Mohsin Nori Hamzah محسن نوري حمزة AU - Raad Mohammed Abed رعد محمد عبد PY - 2018 VL - 24 IS - 1 SP - 207 EP - 217 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Laser shock peening (LSP) is deemed as a deep-rooted technology for stimulating compressive residual stresses below the surface of metallic elements. As a result, fatigue lifespan is improved, and the substance properties become further resistant to wear and corrosion. The LSP provides more unfailing surface treatment and a potential decrease in microstructural damage. Laser shock peening is a well-organized method measured up to the mechanical shoot peening. This kind of surface handling can be fulfilled via an intense laser pulse focused on a substantial surface in extremely shorter intervals. In this work, Hydrofluoric Acid (HF) and pure water as a coating layer were utilized as a new technique to improve the properties and to harden the treated surface of the Al -alloy 7075-T6. Fatigue life by means of laser peened workpieces was improved to 154.3%, 9.78%, respectively, for Hydrofluoric (HF) and pure water compared to un-peened specimens. And the outcomes of Vickers hardness test for laser shock peening with acid and pure water as well as un-peened specimens were 165.2HV30, 143.95HV30 and 134.7HV30, respectively showed a significant improvement in the hardness property.

تعتبر عملية السفع بالليزرعملية تكنولوجية كفوءة نتيجتها نشوء اجهاد انضغاطي متبقي اسفل السطوح المعدنية ولذلك هذه العملية مهمة لتحسين عمرالكلال وخصائص المواد مثل مقاومة البلي والتآكل وهي ذات موثوقية عالية وتقلل من تدهور البناء الجزيئي. وهذا النوع من التعامل الميكانيكي بدون اتصال مباشر مع سطح المعدن. وتجري هذه العملية من خلال تسليط نبضات مكثفة من الليزر على سطوح المعادن وبأوقات قليلة جدا. وفي هذا البحث أُستخدم حامض الهيدروفلوريك كتقنية جديدة وماء نقي كطبقة فوق سطح السبيكة الالمينوم 7075 لتحسين خواص السبيكة وتصليد سطح السبيكة. وقد تحسن عمر الكلال باستخدام الليزر الى154.3% ،9.78% على التوالي عند استعمال حامض الهيدروفلوريك والماء النقي مقارنة مع السطوح غير المعالجة. والنتائج المستحصلة من فحص فيكرز للصلادة عند استخدام حامض الهيدروفلوريك والماء النقي والقطع غير المعالجة كانت كالتالي ( 0165.2HV3، 143.95HV30،134.7 HV30 ) على التوالي وأظهرت تحسن مهم في خاصية الصلادة. ER -