TY - JOUR ID - TI - FATIGUE LIFE ENHANCEMENT OF AL-ALLOY7075 UNDER COMBINED LASER ANDHYDROFLUORIC ACID INTERACTION تحسين عمر الكلال لسبيكة الالمنيوم 7075تحت تأثير تفاعل مشترك لليزر وحامض الهيدروفلوريك AU - Shaker S. Hassan Dr. Mohsin N. Hamza Raad M. Abedh رعد محمد عبد محسن نوري حمزة شاكر سكران حسن PY - 2017 VL - 17 IS - 3 SP - 515 EP - 522 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - Laser shock peening (LSP) is a technical method for generation the compressive residual stress. LSP has been shown to greatly improve fatigue strength and lifetime. A study of fatigue under a constant repeating bending stress has been conducted on AL-alloy 7075 alloy at a stress ratio (R= -1) and room temperature using laser peening technique with overlay hydrofluoric acid (HF) as a confinement acid layer and as a media to increase the penetration of laser pulses. Two groups of test have been considered. The first group (15 specimens) was examined under unpeened situation. The second group (15 specimens) was examined under acid laser peening (ACLP). All mentioned groups were tested to generate the S - N curve. hydrofluoric acid (HF) coating was used as a new technique to improve the properties of the AL-alloy 7075. The experimental data showed that the use of (HF) acid, as a coating material, largely increased the compressive residual stress at the surface. The results provided a substantial improvement in fatigue life improvement factor reaching to 80% for this new coating.

الصعق باستخدام الليزر تعتبر من الطرق الحديثة لتوليد جهد متبقي ولتحسين مقاومة الكلال والعمر التشغيلي . تمت الدراسة في ظروف حمل مستمر ترددي وبدرجة حرارة الغرفة مع استخدام تغطية سطح السبيكة بحامض فلوريد الهيدروجين بعد عزله عن السبيكة لزيادة نفوذية نبضات الليزر. وقد استعملت مجموعتين ، كل مجموعة تتكون من 15 قطعة وفحصت الاولى بدون تاثير الليزر والثانية تحت تاثير الليزر وبوجود الحامض يغطي السبيكة .الغاية هو لغرض عمل مخطط الاجهاد مع عدد الدورات.يعتبر استخدام الحامض فلوريد الهيدروجين تقنية جديدة لتحسين خواص سبيكة الالمنيوم 7075 . وأظهرت النتائج باستخدام هذه الطريقة زيادة كبيرة في الاجهاد الانضغاطي المتبقي على سطح المعدن وكذلك تحسن في معامل تحسن خواص الكلال بنسبة تصل الى 80 % لطبقة الطلاء الجديدة . ER -