TY - JOUR ID - TI - Effect of Temperature on Buckling of Composite Materials Column AU - Kadhim K. Resan AU - Mohammed H. Ali AU - Noor K. Faheed PY - 2017 VL - 20 IS - 3 SP - 511 EP - 519 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - A theoretical and experimental investigation pertaining to the buckling behavior of slender fiber reinforced polymer columns subjected to axial loading under varying temperatures (from room temperature to 50℃). Two groups of composite materials were used for manufacturing of test specimens, the first consist of perlon fiber as a reinforcement and acrylic resin as a bonding matrix, while the second consists of a combination of perlon and carbon fibers as reinforcement. The composite specimens were fabricated by vacuum molding technique and cut according to ASTM D-638 for conducting tensile test. The data from tensile test were used to calculate the effective slenderness ratio and defining the column as Euler buckling column. An experimental rig was designed, manufactured and calibrated to study the effect of thermal and buckling load subjected to columns.Numerical analyses pertaining the buckling behavior for both groups were conducted. The results show that the temperature has a considerable effect on properties of fiber reinforced polymer composites where the value of critical load and Young's Modules decrease with the increase of temperature for both groups. Perlon & Carbon reinforcement composites gave best mechanical properties, which make them the best candidate to improve the buckling resistance characteristics of composite materials.

يتناول البحث تحقيق نظري و تجريبي سلوك الانبعاج لأعمدة المصنوعه من الموادالبوليمريه المقوى بالألياف التي تخضع لحمل محوري في درجات حرارة متفاوتة (درجة حرارة الغرفة إلى 50 درجة مئوية). مجموعتان من المواد المركبة تم استخدامهما لإنتاج عينات الاختبار، الاولى تتكون من الياف البرلون كماده تقويه و(acrylic resin)كماده اساس رابطه بينما المجموعه الثانيه تتالف من الياف البرلون والكاربون كماده تقويه. تم تصنيع عينات الاختبار بواسطة تقنية ( (vacuum modelingوقطعت وفقا ل((ASTM D-638 لإجراء اختبار الشد. البيانات من اختبار الشد تم استخدامها لحساب نسبة النحول. في هذه الدراسة، تم تصميم جهازتجريبي خاص وتصنيعه ثم معايرته لغرض دراسة تأثير الحمل الحراري والانبعاج على الاعمده كما تم اجراءتحليل عددي يتناول سلوك الانبعاج لكلتا المجموعتين.أظهرت النتائج أن درجة الحرارة لها تأثير كبير على الخصائص مختلفة للمواد المركبه البوليمريه المقواه بالالياف حيث ان قيمة الحمل الحرج ومعامل المرونه تتناقص مع ارتفاع درجة الحرارة لكلا النوعين من المجموعات المركبة. المواد المركبه (مع الياف البرلون والكربون كماده تقويه) أظهرت خصائص ميكانيكيه افضلَ، التي تَجْعلُهم أفضل مرشّحِ لتَحسين خصائصِ مقاومةِ الانبعاج للموادِ المركّبه. ER -