TY - JOUR ID - TI - Tuneable Fiber Bragg Grating for Magnetic Field Sensor AU - Farah S. Al-Thahaby AU - Anwaar A. Al-Dergazly PY - 2017 VL - 20 IS - 5 SP - 1112 EP - 1123 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - In this work, four fiber Bragg gratings are fabricated by infiltration different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core photonic crystal fibers (HC19-1550 (Thorlab Company)). The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. This stage is capable of moving the fibers in micrometer resolution steps. The fabrication was carried out using blue laser operated at wavelength of 405 nm. The infiltrated four photonic crystal fibers were exposed to the blue laser beam of 405 nm forming periodic fringes for Bragg grating generation. These fringes were generated from the interference of two splitted laser beams. All fabricated fibers have the same Bragg length of 3.8 cm and average gratings periods of 0.224 μm. The four fibers were analyzed by an optical microscope which displayed the areas that were cured using blue laser. The fabricated fibers also were tested by putting laser beam at one end of the fiber and determining the transmittance at the other fiber end by optical signal analyzer (Thorlabs-CCS200). The resulted Bragg grating fibers have 653.3 nm Bragg reflected wavelength. The results also showed that fiber with higher volume of olive oil has the highest reflection peak about 96.09647 % with the greatest FWHM (full width at a half maximum) about 0.74 nm.In addition, three of the fabricated fibers (B, C and D) that contained olive oil were prepared for testing magnetic field sensor. The results show that all the fibers shifted to near infrared range. The results also showed that fiber with higher concentration of olive oil has the greatest magnetic wavelength shift about 653.4 nm, the highest fiber sensitivity about 0.000494623656 nm/ Gauss, the highest reflection peak about 96.91827 %, and the greatest FWHM about 0.98 nm.

تم في ھذا البحث تصنیع أربعة ألیاف براك المحززة وذلك بحقنھا بمختلف الاحجام من السوائل (المادة الصمغیة البصریةزیت الزیتون مذاب مع الایثانول) بداخل الجوف لتلك الالیاف البلوریة الفوتونیة. تقنیة تداخل تقسیم السعة مع منصة ،Glass Mechanixانتقالیة مصممة خصیصا وبدقة عالیة أستخدمت في عملیة التصنیع. التصنیع تم بأستخدام لیزر أزرق یعمل عند الطول الموجي 405 نانومتر. الألیاف البلوریة الفوتونیة الأربعة المحقونة تم تعریضھا لأشعة اللیزر الأزرق ذو الطول الوجي 405 نانو متر مُكونة اھدابا متكررةبشكل دوري لتولید حزوز براك. ھذه الأھداب تولدت من تداخل شعاعي اللیزر الأزرق المنقسمین ذوي الطول الموجي 405 نانو متر. طولالبراك المصنع للألیاف یساوي 3.8 سم و معدل فترة الحزوز تساوي 0,224 مایكرو متر. الألیاف الأربعة تم تحلیلھا بوساطة المجھرالبصري والذي أظھر المناطق التي تمت معالجتھا بأستعمال اللیزر الأزرق. الألیاف المصنعة تم فحصھا أیضا عن طریق وضع لیزر عند(Thorlabs-CCS احدى نھایتي اللیف وقیاس النفاذیة عند النھایة الأخرى بأستخدام مُحلل الأشارة البصریة ( 200 . ألیاف براك المحززةصُنعت عند الطول الموجي لبراك 653.3 نانو متر. وكذلك أظھرت النتائج أن اللیف ذي الحجم الأعلى من زیت الزیتون یمتلك أعلى قمةأنعكاسیة حوالي 96,09647 % نانو متر و أكبر عرض كامل عند الحد الأعلى للمنتصف حوالي 0,74 نانو متر.والتي تحتوي على زیت الزیتون تم فحصھا كمُتحسس للمجال PCF (B, C, and D) بالأضافة، ثلاثة من الألیاف المصنعةالمغناطیسي. أظھرت النتائج بأن كل الألیاف تتحرك نحو الأشعة تحت الحمراء القریبة. وكذلك أظھرت النتائج بأن اللیف ذي الحجم الأعلىمن زیت الزیتون یمتلك أعلى تحسس مغناطیسي في الطول الموجي حوالي 653.4 نانو متر، أعلى الألیاف حساسیة بمقدار0.000494623656 نانو متر جاوس، أعلى قمة أنعكاسیة حوالي 96,91827 % نانو متر و أكبر عرض كامل عند الحد الأعلىللمنتصف حوالي 0,98 نانو متر. ER -