TY - JOUR ID - TI - Experimental and Theoretical Behavior of Reinforced Concrete Two Way Slabs Strengthened by Steel Fiber Ferrocement Layers at Tension Zone AU - Mazen D. Abdullah PY - 2018 VL - 26 IS - 3 SP - 199 EP - 211 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - An experimental and analytical behavior of strengthened reinforced concrete two way slabs by steel fiber ferrocement layers ,this study included testing 14 simply supported two way slabs, which include 1 control slab, 13 strengthened slabs. In the strengthened slabs the effect of the ferrocement layers with; steel fiber content in the ferrocement mortar of (0.25,0.5,0.75.1.1.25%), thickness of ferrocement layers, the compressive strength for ferrocement mortar and wire mesh layers number of ferrocement was investigated. The mid span deflection at ultimate load and cracks pattern were discussed. All the reinforced concrete slab specimens were designed of the same dimensions and reinforced identically to fail in flexure. Simply supported conditions for all slabs has bean tested under central concentrated load. The experimental results show that; the ultimate loads and mid span deflection of strengthened reinforced concrete slabs were more effected by using the steel fiber on the ferrocement mortar, increasing the thickness of ferrocement and the compressive strength of ferrocement. Three-dimensional nonlinear finite element analysis has been used to conduct the analytical investigation, ANSYS (Version 16.0) computer program was used in this study. The analytical result from modeling in ANSYS program exhibited a good agreement with experimental results.

تناول هذا البحث دراسة عملية ونظرية لخواص البلطات الخرسانية المسلحة ذات الاتجاهين و المقواة بالفيروسمنت حيث اجريت مجموعة من الاختبارات لدراسة تاثير: تعدد الطبقات للمشبكات الحديدية حيث تم استخدام (1و2و3) طبقات من المشبكات الحديدية ، سمك طبقة الفيروسمنت ، و مقاومة الانضغاط للفيروسمنت على زيادة مقاومة الاثناء للعتبات و مراقبة سلوك الحمل – الهطول بعد التقوية بالإضافة إلى تأثيرها على عرض التشققات. يتضمن الجزء العملي فحص اربعة عشر بلاطة, تم تقوية ثلاثة عشر منها بالفيرو سمنت و تركت بلاطة واحدة بدون تقوية كبلاطة مرجعية. صممت جميع البلاطات الخرسانية المستخدمة في هذا البحث بنفس الابعاد وتم تسليحها بشكل يضمن فشلها بالانحناء، تم فحص جميع البلاطات في فضاء بسيط الاسناد وبتسليط حمل مركز في منتصف هذه البلاطات. أظهرت النتائج العملية التي تم الحصول عليها من النتائج المختبرية أن عملية تقوية البلاطات الخرسانية باستخدام لفيروسمنت ادت الى زيادة في قيمة التحمل الاقصى للانحناء للبلاطات (Ultimate Loads) يصل مقدارها بين (11-22%) مقارنة بالبلاطات الخرسانية غير المقواة باستخدام لفيروسمنت. تم أستعمال التحليل اللاخطي بواسطة العناصر المحددة (Finite Elements) ثلاثية الأبعاد كوسيلة عددية للدراسة والتحري عن سلوك وتصرف هذه البلاطات باستخدام البرنامج (ANSYS الاصدار السادس عشر) حيث تم في هذا البرنامج تمثيل الاجزاء الخرسانية باستخدام العناصر الطابوقية ذات الثمانية عقد (Solid 65). ER -