TY - JOUR ID - TI - Recovery of Aluminum from Industrial Waste (Slag) by Melting and Electrorefining Processes استرجاع الألمنيوم من المخلفات الصناعية )الخبث) بواسطة عملية الصهر وعملية التنقية AU - Maytham Mahmood Ali ميثم محمود علي AU - Rabiha Saleh Yassen رابحة صالح ياسين PY - 2018 VL - 14 IS - 3 SP - 81 EP - 91 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - Slag of aluminum is a residue which results during the melting process of primary and secondary aluminum production. Salt slag of aluminum is hazardous solid waste according to the European Catalogue for Hazardous Wastes. Hence, recovery of aluminum not only saves the environment, but also has advantages of financial and economic returns. In this research, aluminum was recovered and purified from the industrial wastes generated as waste from both of State Company for Electrical and Electronic Industries (Baghdad/AlWaziriya) and General Company for Mechanical Industries (Babylon/-Al-Escandria). It was found that these wastes contain tiny proportions of other elements such as iron, copper, nickel, titanium, lead, and potassium. Wastes were recovered for green sustainability, saving energy and cost effectiveness. The method applied for recovering aluminum was pyro-metallurgical method by smelting and refining. X-Ray fluorescence spectroscopy and X- Ray diffraction techniques of the slag sample were used to determine the chemical analysis and phases, respectively. Melting experiments were conducted by using different types of fluxes (KAlF4, NaCl, KCl and AlCl3) at different percentages (0, 5, 10 %) and different melting temperatures (700, 750, 800oC). Design of Experiment (DOE) by Taguchi method, orthogonal array L9, was used in melting experiments. Melting efficiency of aluminum was equal to 84.7%. Electro-refining of aluminum was done by using anhydrous aluminum chloride and NaCl as ionic liquids at low temperature 100 ◦C in electro-refining method producing aluminum of 99% purity.

خبث الألومنيوم هو البقايا التي تنتج أثناء عملية الصهر لإنتاج الألمنيوم الأولي والثانوي. يعتبر خبث الألومنيوم من المخلفات الصلبة الخطرة حسب البيان الأوروبي للنفايات الخطرة. وبالتالي، استرجاع الألومنيوم من الخبث ليس فقط لحماية البيئة، ولكن أيضا له فوائد اخرى من الناحية المالية والاقتصادية. في هذا البحث تمت عملية استرجاع وتنقية الألمنيوم من المخلفات الصناعية الناتجة عن مخلفات صناعية للشركة العامة للصناعات الكهربائية والالكترونية/ الوزيرية ومخلفات الشركة العامة للصناعات الميكانيكية / الإسكندرية. حيث تحتوي المخلفات بالاضافة الى الالمنيوم على نسب من عناصر أخرى مثل الحديد، النحاس، النيكل، التيتانيوم، الرصاص، والبوتاسيوم. حيث يتم استرجاع الالمنيوم للمحافظة على البيئة، وتوفير الطاقة والكلفة الاقتصادية. وكانت الطريقة المطبقة لاسترجاع الألمنيوم بالطريقة الحرارية عن طريق الصهر والتنقية. واستخدمت تقنيات التحليل الطيفي وتقنيات انعراج الأشعة السينية لعينة الخبث في أيجاد التحليل الكيميائي ومعرفة الاطوار. أجريت تجارب الصهر باستخدام أنواع مختلفة من مزيلات الخبث (, KAlF4 NaCl , KCl , AlCl3) و بنسب مختلفة (0، 5، 10) ودرجات حرارة انصهار مختلفة (700، 750، 800 سيليزية ). تم استخدام تصميم التجارب بطريقة تاغوتشي L9، في تجارب الصهر. وكانت كفاءة عملية صهر الألمنيوم 84.7 ٪. وقد تمت عملية التحليل الكهربائي للألمنيوم بأستخدام كلوريد الألومنيوم اللامائي و كلوريد الصوديوم كسوائل أيونية عند درجة حرارة منخفضة 100 سيليزية ، في طريقة التحليل الكهربائي تم الحصول على الألومنيوم بنقاوة 99٪. ER -