@Article{, title={Modeling and Simulation of Solar Module performance using Five Parameters Model by using Matlab in Baghdad City النمذجة والمحاكاة لأداء اللوح الشمسي بأستخدام نموذج الخمس عوامل بواسطة الماتلاب في مدينة بغداد}, author={Zainab Riyadh Talib زينب رياض طالب and Emad Talib Hashim عماد طالب هاشم}, journal={Journal of Engineering مجلة الهندسة}, volume={24}, number={10}, pages={15-31}, year={2018}, abstract={This work presents the modeling of the electrical response of monocrystalline photovoltaic module by using five parameters model based on manufacture data-sheet of a solar module that measured in stander test conditions (STC) at radiation 1000W/m² and cell temperature 25℃. The model takes into account the series and parallel (shunt) resistance of the module. This paper considers the details of Matlab modeling of the solar module by a developed Simulink model using the basic equations, the first approach was to estimate the parameters: photocurrent Iph, saturation current Is, shunt resistance Rsh, series resistance Rs, ideality factor A at stander test condition (STC) by an iteration process. To implement the iteration process, a numerical approach based on the Newton Raphson method has been implemented and programmed in Matlab. The second mathematical model used in Matlab/Simulink using equations for each parameter to determine the parameters at all operating conditions. The Matlab program gives the information about the behavior of the practical PV module, under different atmospheric conditions. The model accuracy was also analyzed through finding out the compatibility between the practical and the theoretical aspects at different solar radiation intensity 500, 750 and 1000 W/m2 by extracting the error ratios. The results show that there is difference between theoretical (modeled) and experimental, the best validation (less error) between five parameters model and experimental maximum power results at radiation 500, 750, 1000 W/m2 and STC was 5.5%, 19%, 18% and 12.3% in January respectively, due to the decreases in ambient temperature and thus decreases in the temperature of solar module in January led to increase in maximum output power and producing best validation between model and experimental in this month.

يقدم هذا البحث نمذجة الاستجابة الكهربائية لأداء اللوح الشمسي أحادي البلورة باستخدام نموذج الخمس عوامل يستند إلى بيانات ورقة التصنيع للوح الشمسي المقاسة عند الظروف القياسية. يأخذ النموذج في الاعتبار مقاومة التوالي والتوازي للوح الشمسي ويهتم البحث بنمذجة ماتلاب المفصلة للوحدة الشمسية بواسطة نموذج سيمولينك المتطور الذي يستخدم المعادلات الأساسية،الطريقة الأولى لحساب العوامل: التيار الضوئي، تيار إلاشباع، مقاومة التوازي، مقاومة التوالي, عامل الجودة في حالة الظروف القياسية (الإشعاع 1000 واط/متر مربع ودرجة حرارة الخلية ℃25) من خلال عملية التكرار. لتنفيذ عملية التكرار،تم تطبيق نهج رقمي يستند إلى طريقة نيوتن رافسون وبرمجتها فى Matlabالنموذج الرياضي الثاني المستخدم في ماتلاب / سيمولينك من خلال تكوين المعادلات لكل عامل لايجاد العوامل في جميع الظروف التشغيل. برنامج ماتلاب يعطي المعلومات حول السلوك العملي للوح الكهروضوئي في ظل الظروف الجوية المختلفة. كما تم تحليل دقة النموذج من خلال معرفة التوافق بين العملي والنظري عند شدة الإشعاع الشمسي المختلفة 500,750,1000 واط/مترمربع باستخلاص نسب الخطأ. أظهرت النتائج وجود فرق بين نظري (نموذجي) وتجريبي، أفضل تحقيق للطاقة القصوى بين نموذج الخمس العوامل والنتائج التجريبية في الإشعاع 500, 750, 1000 واط/متر مربع وSTC هي 5.5% و19% و18% و12.3 في كانون الثاني على التوالي, بسبب الأنخفاض في درجة حرارة الجو وبالتالي انخفاض حرارة اللوح الشمسي في كانون الثاني مما يؤدي الي زيادة انتاج الطاقة القصوى وانتاج افضل تحقق بهذا الشهر بين المودل والعملي.} }