TY - JOUR ID - TI - Experimental Investigation on Behavior of Composite Open Web Steel Joists البحث العملي لتصرف العتبات الفولاذية المفتوحة الوترات AU - Ali Farhan Hadeed علي فرحان حديد AU - Laith Khalid Al-Hadithy ليث خالد الحديثي AU - Riyadh J. Aziz رياض جواد عزيز PY - 2018 VL - 21 IS - 3 SP - 393 EP - 404 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - The composite opened web steel joist supported floor systems have been common for many years. It is economic and has light weight and can embed the electrical conduit, ductwork and piping, eliminating the need for these to pass under the member, consequently eliminate the height between floors. In order to study the joist strength capacity under the various conditions, it had been fabricated seven joists composed of the steel and concrete slab connected to the top chord by shear connectors (headed studs). These joist have 2820 mm length c/c of the supports and 235 mm overall depth. In the present study, six variable parameters are adopted (Studs distribution, Degree of shear connection, Degree of the web inclination, Shape of the web, Density of concrete for slab and length of the shear connector). The test results exhibited that minimum strength capacity was 160kN for light weight joist and maximum capacity was 225kN for joist of long shear connectors at failure. The results were compared by ultimate flexural model by Azmi.

الروافد الفولاذية المركبة ذات الوترات المفتوحة شائع استعمالها للعديد من السنين لاسناد الارضيات والسقوف وهي اقتصادية وخفيفة الوزن وتغطي فضاءات كبيرة ويمكن تمديد كيبلات الكهرباء وقنوات التكييف والانابيب من خلال فتحات الوترات وبالتالي نحصل على اقل ما يمكن من الا رتفاع الصافي بين ارضيات الطوابق . لغرض دراسة التحمل لهذه الروافد تحت مختلف المتغيرات تم تشكيل سبعة روافد مركبة من الحديد بطول 2820 ملم مركز الى مركز الاسناد وعمق كلي 235 ملم ربطت عليها بلاطة من الكونكريت بواسطة روابط قوى القص لدراسة التحمل وفق المتغيرات التالية ( أسلوب توزيع روابط القص studs ,درجة الربط بين البلاطة والوتر الفولاذي العلوي , زاوية ميل اضلاع الجذع , شكل الجذع , كثافة الخرسانية للبلاطة,طول رابط القص).أضهرت النتائج العملية ان العتبات ابدت اقل تحمل قدره 160 كيلونيوتن للرافدة ذات البلاطة خفيفة الوزن واعلى تحمل قدره225 كيلونيوتن للرافده ذات الرابط الطويل (50 ملم) عند الفشل.هذه النتائج قورنت تحليليا وفق نموذج عزمي . ER -