TY - JOUR ID - TI - Study the effect of diode laser on the properties of dental composite دراسة تأثير الليزر الدايود على خصائص مادة الحشوة الضوئية للأسنان AU - Thuraia Bhagat Ayed AL-Tikriti1 ثريا بهجت عايد التكريتي1 AU - Amer shaker Mahmood1 عامر شاكر محمود1 AU - Muthenna Sh. Rajab2 مثنى شعبان رجب2 PY - 2018 VL - 23 IS - 4 SP - 74 EP - 82 JO - Tikrit Journal of Pure Science مجلة تكريت للعلوم الصرفة SN - 18131662 24151726 AB - In this study anterior filling was used type of G-aenial and used in the restoration of teeth, then conducted a study and divided into four groups of the first sample, which is the group A, which was irradiated by laser and then hardened by Light Curing then irradiated with laser and the third sample C, which was irradiated with Light Curing, and the laser on the sample at the same time and the fourth sample D The original samples are not exposed to irradiation (control) Based on the filling specifications The sample was prepared cylindrical and dimensions (10 × 6mm) to be used in a number of Synthetic measurements such as x-ray diffraction analysis, electron microscopy scanner and some important mechanical properties such as hardness and wear. The results showed X-ray diffraction that the components of A, B, C and D aggregates gave emitted precipitation and a thin crystalline state clear all forms of x-ray diffraction. It was found that the XRD test of the B group showed a significant increase in the intensity of the material in the G-aenial filler and is indicated by the laser effect clearly after light therapy and laser irradiation.The results of the SEM examination of group B in the case of Light Curing and laser hardening showed clear homogeneity and better atomic distribution compared to other studied groups.

في هذه الدراسة تم استخدام حشوة أمامية من نوع G-aenial والمستخدمة في ترميم الأسنان ، بعدها أجريت عليها دراسة وقسمت إلى أربع مجاميع العينة الأولى والتي هي مجموعة A التي تم تشعيعها بليزر ثم تصليبها بالعلاج الضوئي Light Curing والعينة الثانية B والتي تم تصليبها بالعلاج الضوئي Light Curing ثم تشعيعها بالليزر والعينة الثالثة C التي تم تشعيعها بالعلاج الضوئي Light Curing والليزر على العينة في نفس الوقت والعينة الرابعة D العينات الأصلية الغير معرضة للتشعيع (الكونترول) واستنادا على مواصفات الحشوة تم تحضير العينة بشكل اسطوانية وبأبعاد 10×6mm)) وتم استخدامها في عدد من القياسات التركيبية مثل تحليل حيود الأشعة السينية والمجهر الألكتروني الماسح وبعض الخصائص الميكانيكية المهمة مثل الصلادة والبلى. وأظهرت نتائج حيود الأشعة السينية أنﱠ المكونات للمجاميع A,B,C,D أعطت قمماً مستطاره منبعثة وبحالة بلورية نحيفة Crystalline)) واضحة لجميع أشكال حيود الأشعة السينية . بينت النتائج أن فحص XRD لمجموعة B حدث فيه ارتفاع كبير في الشدة للمواد في حشوة G-aenial وذلك نتيجة لتأثير الليزر بشكل واضح بعد إجراء المعالجة بالضوء ثم التشعيع بالليزر. وأظهرت نتائج الفحص المجهري SEM للمجموعة B في حالة المعالجة بالضوء ثم التصليب بالليزر تجانساً واضحاً وأفضل توزيع ذري مقارنة مع المجاميع الأخرى المدروسة. ER -