TY - JOUR ID - TI - Comparative Analysis of Various Multicarrier Modulation Techniques for Different Multilevel Converters مقارنة بين اداء تقنيات التضمين المتعددة النواقل لجميع انواع مغيرات القدرة متعددة المستويات AU - Omar Talal Mahmood Altaee عمر طلال محمود الطائي AU - Ahmed M. T. Ibraheem Alnaib احمد محمد توفيق إبراهيم النائب PY - 2018 VL - 24 IS - 12 SP - 45 EP - 59 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The applications of Multilevel Converter (MLC) are increased because of the huge demand for clean power; especially these types of converters are compatible with the renewable energy sources. In addition, these new types of converters have the capability of high voltage and high power operation. A Nine-level converter in three modes of implementation; Diode Clamped-MLC (DC-MLC), Capacitor Clamped-MLC (CC-MLC), and the Modular Structured-MLC (MS-MLC) are analyzed and simulated in this paper. Various types of Multicarrier Modulation Techniques (MMTs) (Level shifted (LS), and Phase shifted (PS)) are used for operating the proposed Nine level - MLCs. Matlab/Simulink environment is used for the simulation, extracting, and analysis the results. Finally, a comparison is made between the results for all topologies that are implemented regarding to the criteria of the output voltage waveforms harmonic distortion factor, No. of the necessitated power components, and the complexity of each circuit. Based on simulation results, the MS-MLC is finer as compared to the other types of MLCs. It also observed that the MLCs (with three types) using Phase Opposition Disposition (POD) technique is performed better in terms of getting greater fundamental output voltage and lower THD% as compared to the other techniques.

في السنوات القليلة الماضية ازداد الاقبال والتوجه نحو تطبيقات مغيرات القدرة متعددة المستويات MLCs بسبب الحاجة الماسة للطاقة النظيفة. خصوصا وان هذه الانواع من المغيرات تعمل او تتوافق مع مصادر الطاقات المتجددة. بالاضافة الى امكانية عملها بقدرات وفولتيات عالية لانها تقوم بتوليف موجة اخراج التيار المتناوب المطلوبة من عدة مصادر للتيار المستمر دون الحاجة الى استخدام مفاتيح تتحمل الجهد العالي. حيث تم تمثيل ومحاكاة مغير فولتية ذو تسع مستويات المقترح وبالاشكال التصميمية الثلاثة لتكوين مغير القدرة متعدد المستويات وهي : DC-MLC, CC-MLC, MS-MLC. تمت السيطرة على جميع هذه الانواع من مغيرات القدرة باستخدام مختلف تقنيات التضمين المتعددة النواقل MMTs والتي تتضمن طريقتي : تقنيات تضمين الموجات الناقلة المزاحة عموديا LS و تقنية تضمين الموجة الناقلة المزاحة أفقيا ( طوريا ) PS . تم أعتماد برنامج المحاكاة Matlab/Simulink لمحاكاة وتحليل نتائج مغير القدرة المقترح بجميع طرق التمثيل و لجميع طرق السيطرة التي ذكرت. ولمعرفة النوع الامثل تمت مقارنة النتائج على اساس معايير جودة الجهد الناتج من ناحية احتواءها على التوافقيات الغير مرغوب بها, القيمة العظمى لفولتية الاخراج. بالاضافة الى انه تمت المقارنة على اساس عدد مكونات القدرة الاساسية المطلوبة في كل نوع من انواع تمثيل مغيرات القدرة الثلاث. ER -