@Article{, title={CLEANING AND STERILIZATION EFFECT ON THE TORSIONAL PROPERTIES OF PROTAPER ROTARY TITANIUM COBALT (Ti-C0) ENDODONTIC INSTRUMENT تأثير التنظيف والتعقيم على عزوم الالتواء لمادة التيتانيوم كوبالت المستخدمة في توسيع قنوات جذور الاسنان.}, author={Ibrahim H. Mukhlif ابراهيم حمد مخلف}, journal={Journal of university of Anbar for Pure science مجلة جامعة الانبار للعلوم الصرفة}, volume={5}, number={1}, pages={37-40}, year={2011}, abstract={This study was conducted to evaluate the effect of the number of cycles of cleaning using NaOCl solution of different concentration and sterilization using autoclave and dry heat oven on the torsional properties of rotary (Ti-Co) instruments. A total of forty five rotary protaper finisher instruments were divided into 3 groups: Group 1 were subjected to neither cleaning nor sterilization cycles and assigned as the control group. Group 2 and group 3 were subjected to 5 and 10 cleaning and sterilization cycles respectively, soaked within (2% and 5%) NaOCl, were sterilized with autoclave and dry heat oven. Then, all instruments were subjected to a clockwise torsional load until fracture, the torsional moment and angular deflection at fracture were calculated. The results show a significant reduction in the torsional strength after cleaning and sterilization cycles regardless the concentration of NaOCl, type and number of sterilization cycles. For the angular deflection, there was a highly significant reduction, where, the number of cycles was the most influencing factor for reduction of the angular deflection whereas, the concentration of NaOCl and the type of sterilization were show no significant influence on the angular deflection.

أجریت هذه الد ا رسة لتقییم تأثیر عدد م ا رت (دو ا رت) التنظیف باستخدام محلول القاصر بت ا ركیز مختلفة والتعقیم باستخدام جهاز التعقیمبواسطة البخار المحمي و الضغط و فرن الح ا ررة الجاف على خواص الالتواء للأدوات الدوارة المصنوعة من التیتانیوم كوبالت. تماستخدام خمسه أداة دوارة نوع (بروتیبر المتممة) وقد تم تقسیمها إلى ثلاثة مجامیع:- المجموعة الأولى :أدوات لم تعرض لأي من دو ا رت التنظیف والتعقیم وتم تحدیدها كمجموعة سیطرة.- المجموعة الثانیة والثالثة : تم تعریضهما لخمس وعشر دو ا رت ( تنظیف وتعقیم ) بالتعاقب، غم رت بمحلول القاصر بت ا ركیز ٢% و٥% بمحلول القاصر، تم تعقیمها باستخدام جهاز التعقیم بواسطة البخار المحمي و الضغط وفرن الح ا ررة الجاف. كل الأدوات تمتعریضها لأحمال التواء باتجاه عقارب الساعة حتى الكسر وقد تم احتساب قیم عزوم الالتواء والانح ا رف ال ا زوي لكل أداه بعد الكسر.أظهرت نتائج الد ا رسة تأثی ا ر ملحوظا في تقلیل قیم عزوم الالتواء بعد دو ا رت التنظیف والتعقیم بصرف النظر عن تركیز محلول القاصر ونوع التعقیم وعدد م ا رت التنظیف والتعقیم. بخصوص الانح ا رف ال ا زوي كان هناك تأثی ا ر عالیا ملحوظا في تقلیل قیم الانح ا رف ال ا زويللأدوات. حیث أن عدد م ا رت التنظیف والتعقیم كانت عاملا مؤث ا ر بینما كان تركیز محلول القاصر و نوع التعقیم ذو اثر غیر ملحوظ} }