TY - JOUR ID - TI - Study the Effect of Epoxy Additives on Some Physical Properties of Asphalt Cement دراسة تاثير الايبوكسي على بعض خواص الاسفلت الاسمنتي. AU - SalimM.A. Al-ani AU - Thamer J. Ahmed ثامر يوسف احمد AU - Khalil T. Al-Rawi خليل ثابت حسان AU - Taher M.A. Al-ani** طاهر محمود العاني PY - 2009 VL - 3 IS - 1 SP - 31 EP - 37 JO - Journal of university of Anbar for Pure science مجلة جامعة الانبار للعلوم الصرفة SN - 19918941 27066703 AB - Abstract:In the series of study on the asphalt cement to improve properties of asphalt cement several polymers materials are used for this purpose. In this study Epoxy used at different percentage by weight (1, 2, 4 and 6) %. Epoxy was added in three cases, pure Epoxy and the other two cases were mixing of Catalyst-Epoxy by weight in the two ratio (1:3) and (1:4).The effect of additives on the asphalt cement properties are evaluated by penetration test (ASTM D-5)(10), softening point test (ASTM D-2398)(10), and Kinematics viscosity test (ASTM D-2170)(10). Temperature susceptibility of asphalt cement was evaluated by using Penetration viscosity number ( PVN ). The study shows that Epoxy, 1:3 Epoxy and 1:4 Epoxy additives have more effect on the physical properties of asphalt cement and make asphalt softer than original asphalt cement, the additives reduced the temperature susceptibility, but Epoxy have more reduction in the susceptibility of asphalt cement compared with 1:3 Epoxy and 1:4.

في سلسلة الدراسات التي أجريت على تحسين خواص المواد الإسفلتية استخدمت مواد البوليمرات لهذا الغرض. هذه الدراسة استخدمت مادة الايبوكسي مع الإسفلت في عدد من نسب الإضافة كنسبة وزنية وهي ( 1و 2و 4و 6) %. أضيفالايبوكسي إلى الإسفلت في ثلاث حالات هي ايبوكسي بصورة خالصة وايبوكسي مع مصلد بنسبة خلط (مصلد – ايبوكسي) كنسبوزنية وهي ( 3:1 ) و ( 4:1 ). لتقيم تأثير هذه المواد المضافة استخدمت بعض الفحوصات الفيزيائية منها فحص(Softening Point Test ASTM D-2398)( وفحص نقطة السيولة ( 10 (Penetration Test ASTM D-5)( الاختراق ( 10بالإضافة إلى ذلك قيم التحسس الحراري .(Kinematic Viscosity Test ASTM D-2170)( وفحص اللزوجة الحركية ( 10الدراسة بينت أن . (Penetration Viscosity Number) (PVN) بواسطة استخدام العامل (Temperature Susceptibility)الايبوكسي الخالص والمصلد مع الايبوكسي ( 3:1 ) و ( 4:1 ) اثرت بشكل واضح على الخواص الفيزيائية وجعلته اكثر ليونة مقارنهمع الإسفلت الأصلي. كما وان الدراسة قد بينت ان المادة المضافة قللت حساسية الإسفلت الى الحرارة وان هذا التأثير كان اكثر.( وضوحا مع الايبوكسي الخالص مقارنة مع المصلد و الايبوكسي ( 3:1 ) و( 4:1 ER -