TY - JOUR ID - TI - Theoretical Study of Geometrical Properties and Aberrations in Doublet Magnet Lenses AU - Najwan Hussein Numan PY - 2018 VL - 26 IS - 8 SP - 178 EP - 187 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - Some of the essential geometrical properties of the lens, like bore diameter, airgap length, half-half width, magnetic flux density, projector focal length, focusing power, magnification, and spherical aberration are studied in the present work. Computational results are obtained for the geometrical properties and spherical aberration in doublet magnetic lenses by using computer programs based on the theoretical methods.In this work, increasing the distance between the lens and screen caused a linear increase in the magnification. The effective length, half-half width, and the minimum projector focal length increased the slope when the airgap width and the diameter of the lens are growing. The increase in the bore and airgap width of lens resulted in an exponential decreasing in the magnetic flux density, the maximum value of the focusing power, and the,but the most significant values of the diameter and airgap length caused a minimal effect ontheseproperties. The increase of ampere-turns resulted in a linear increase in the magnetic flux density. Finally, the increasing in the airgap length and the diameter of the lens caused a ramp increase in the spherical aberration coefficient.

في البحث الحاليتمت دراسة بعض الخصائص الهندسية الأساسية للعدسة، مثل قطر التجويف وطول التجويف الهوائي ونصف عرض العدسة وكثافة الفيض المغناطيسي والطول البؤري وتركيز القوةونسبة التكبير والانحراف او الزيغ الكروي. تم الحصول على نتائج حسابية للخصائص الهندسية والانحراف اوالزيغ الكروي في العدسات المغناطيسية الثنائية بواسطة برمجة المعادلات الاساسية بالحاسوبللحسابات النظرية. في البحث الحالي أدت زيادة المسافة بين العدسة والشاشة إلى زيادة خطية في نسبة التكبير. عندما يتزايد عرض الفجوة الهوائية وقطر العدسة فأن ذلك يؤدي الى زيادة الطول المؤثر ونصف الطول والعرض البؤري والحد الأدنى لجهاز الإسقاط المنحدر. أدت الزيادة في عرض التجويف والفجوة الهوائية إلى تناقص أسي في كثافة التدفق المغناطيسي والقيمة القصوى لطاقة التركيز ونسبة التكبير، لكن عند القيم الكبيرة للقطر وطول الفجوة الهوائية تسببت في تأثير ضئيل على هذه الخصائص.أدت الزيادة في عدد اللفات-الأمبيرية إلى زيادة خطية في كثافة التدفق المغناطيسي. وأخيراً أدى تزايد طول الفجوة الهوائية وقطر العدسة إلى زيادة انحدارية في معامل الانحراف او الزيغ كروي. ER -