TY - JOUR ID - TI - Investment of the magnetic field in reducing the corrosion rate and extraction of iron ores from CK45 steel استثمار المجال المغناطيسي في تخفيض معدل التآكل و استخلاص خامات الحديد من فولاذ CK45 AU - Mohammed Abdulateef Ahmed محمد عبد اللطيف أحمد PY - 2017 VL - 10 IS - 4 SP - 130 EP - 143 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - Find out the effect of the magnetic field site resulting from a permanent magnet (a magnet pad) on the rate of corrosion of the carbon steel type (DIN CK45) and to invest this effect in lowering the corrosion rate as a corrosion-retardant factor (corrosion inhibitor); Because of the highest weight loss due to corrosion when the permanent magnet pad is adjacent to the corrosion test chamber (0.0185 gr.); and the lowest weight loss due to corrosion is when the magnetic pad is touching the corroded steel and the value of (0.0062 gr.), and the amount of weight loss is (0.0098 gr.) when the corrosion of the steel is without the magnetic field effect, and the duration of the test is eight consecutive months. The magnetic field is also invested in electrochemical deposition by deposition of the ferric chloride compound (FeCl3) and then converted into Magnetite powder (Fe3O4) and a few Hematite(Fe2O3) in the furnace , as demonstrated by the X-RD test for the resulting powder, and then the particle size of the resulting Magnetite and Hematite powder was estimated at (0.222-158.866µm).

معرفة تأثير موقع المجال المغناطيسي الناتج من مغناطيس دائمي (لوح مغناطيس) على معدل تآكل فولاذ كاربوني نوع (DIN CK45) وأستثمار هذا التأثير في تخفيض معدل التآكل كعامل مثبط للتآكل ؛ حيث ينتج أعلى فقدان للوزن بسبب التآكل عندما لوح المغناطيس الدائمي يكون مجاور لحجرة أختبار التآكل (0.0185gr.) ؛ وأقل فقدان للوزن بسبب التآكل عندما يكون لوح المغناطيس ملامس للفولاذ المتآكل و بقيمة (0.0062gr.) وبمقدار (0.0098gr.) عندما يكون تآكل الفولاذ بدون تأثير للمجال المغناطيسي وكانت مدة الأختبار ثمانية أشهر متتالية . ويستثمر المجال المغناطيسي أيضا" في الترسيب الكهروكيميائي وذلك بترسيب مركب كلوريد الحديديك(FeCl3) ومن ثم تحويله الى مسحوق المغنتايت(Fe3O4) وقليل من الهيماتايت(Fe2O3) بتسخين كلوريد الحديديك بالفرن، كما بينه أختبار حيود ألأشعة السينية X-RD للمسحوق الناتج ، ومن ثم أيجاد الحجم الحبيبي لمسحوق المغنتايت والهيماتايت الناتجين وبمقدار m)µ(0.252-158.866. ER -