@Article{, title={Reverse Engineering Representation Using an Image Processing Modification تمثيل الهندسة العكسية عن طريق استخدام المعالجات الصورية}, author={Ahmed A. A. Duroobi احمد عبد السميع عبد الوهاب and Nareen Hafidh Obaeed نارين حافظ عبيد and Safaa Kadhim Ghazi صفاء كاظم غازي}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={15}, number={1}, pages={56-62}, year={2019}, abstract={In the reverse engineering approach, a massive amount of point data is gathered together during data acquisition and this leads to larger file sizes and longer information data handling time. In addition, fitting of surfaces of these data point is time-consuming and demands particular skills. In the present work a method for getting the control points of any profile has been presented. Where, many process for an image modification was explained using Solid Work program, and a parametric equation of the profile that proposed has been derived using Bezier technique with the control points that adopted. Finally, the proposed profile was machined using 3-aixs CNC milling machine and a compression in dimensions process has been occurred between the proposed and original part so as to demonstrate the verification of the proposed method.

في نهج الهندسة العكسية، يتم جمع كمية هائلة من البيانات معا وذلك أثناء الحصول على البيانات وهذا يؤدي إلى أحجام ملف أكبر ووقت أطول لمعالجة البيانات. فظلا عن ذلك، تركيب الأسطح من هذه البيانات التي تستغرق وقتا طويلا وتتطلب مهارات معينة. في هذا العمل تم تقديم طريقة جديدة للحصول على نقاط السيطرة في أي ملف. حيث تم شرح العديد من العمليات لتعديل الصورة باستخدام برنامج (solid work)، ومعادلة بارامترية من الملف المقترح تم اشتقاقها باستخدام تقنية بيزير مع نقاط التحكم التي اعتمدت. وأخيرا، تم تشغيل الشكل المقترح باستخدام ماكنة تفريز مبرمجة وتم إجراء عملية مقارنة في الأبعاد بين الجزء المقترح والأصلي من أجل إثبات التحقق من الطريقة المقترحة.} }