@Article{, title={Effect of Different Quenching Media on Microstructure, Hardness, and Wear Behavior of Steel Used in Petroleum Industries تأثير أوساط التقسية المختلفة على التركيب المجهري، الصلادة، وسلوك البلى للفولاذ المستخدم في الصناعات النفطية}, author={Jabbar Hussein Mohmmed and Zahid I. Al-Hashimy}, journal={Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية}, volume={}, number={19}, pages={E198-E207}, year={2018}, abstract={Medium carbon steel always used in most parts of the oil and gas industry, due to their cheap, simple manufacturing and easy deformation. However, as-rolled medium carbon steel usually does not meet the demands for many petroleum applications where high hardness and strength are needed; mainly because of their limitations in some mechanical features. Hence, many methods of thermal treatment techniques were adopted with a view to manipulate its structure and thus extend its scope of applications.This study focus on using a proper heat treatment to enhance medium carbon steel properties.Quenching and tempering treatments are usually the end of any manufacturing process to production of a machine component. However, the internal and residual stresses which generate during the heat treatments due to the non-uniform the quenched layer depth lead to distortion or cracked the machine component result in deteriorate the properties. Thus, the selection of optimum parameters of the quenching process is very important to ensure the achievement of the desired properties of the machine component. The main aim of this study is to get the optimal conditions for heat treatment which brought the best combination of mechanical properties of medium carbon steel without tempering treatment. Thus, in current study, an investigation of effects of polymer solution media on the quenching process was carried out with samples made of medium carbon steel. The samples were quenched in four different concentrations (0, 10, 15, 20) % of polymer (polyalkylene glycol) solution and set of quenched samples were tempered at 400 oC for 1h. The resulting as-quenched and tempered microstructures were compared and evaluated. Mechanical properties (hardness and wear rate) of the samples were determined using suitable standards. The results show that the quenched samples in polymer solution with 10% polyalkylene glycol were brought the best combination of mechanical properties as compared with other quenched and tempered samples.

الفولاذ المتوسط الكاربون عادة مستخدم في اغلب الاجزاء في صناعة النفط والغاز نتيجة لرخص ثمنه، بساطة تصنيعه، وسهولة تشكليه. لكن، عادة الفولاذ المتوسط الكاربون بحالته المدرفلة لا يلبي احتياجات العديد من التطبيقات النفطية والتي تحتاج الى مقاومة وصلادة عالية وذلك بسبب محدداته ببعض الصفات الميكانيكية. لهذا فقد اعتمدت العديد من تقنيات التعامل الحراري بغية تعديل تركيب الفولاذ وبالتالي توسيع نطاق تطبيقاته. هذه الدراسة تركز على استخدام معاملة حرارية مناسبة لتعزيز خواص الفولاذ المتوسط الكاربون. معاملات التقسية والمراجعة تكون عادة هي الانهاء لأي عملية تصنيع لإنتاج أجزاء الماكنة. لكن الاجهادات الداخلية والمتبقية والتي تتكون خلال المعاملات الحرارية بسبب عدم انتظام عمق طبقة التصليد تؤدي الى تشوه وتشقق أجزاء المكائن وبالنتيجة انخفاض الخواص. لهذا، اختيار العناصر المثلى لعملية التقسية يكون جدا مهم لضمان الحصول على الخواص المرغوب بها لجزء الماكنة. الهدف الرئيس لهذه الدراسة هو الحصول على الظروف المثلى للمعاملة الحرارية التي من خلالها نحصل على أفضل مجموعة من الخواص الميكانيكية للفولاذ المتوسط الكاربون بدون عملية المراجعة. لهذا، في الدراسة الحالية، تم اجراء دراسة لتأثيرات أوساط المحاليل البوليميرية على عملية التقسية لعينات مصنوعة من الفولاذ المتوسط الكاربون. تم تقسية العينات في أربع تراكيز مختلفة (0، 10، 15، 20) % لمحلول (polyalkylene glycol) البوليميري وتم اجراء عملية مراجعة عند 400م0 لمدة ساعة واحدة لمجموعة من العينات المقساة. التراكيب المجهرية للعينات المقساة والمراجعة تم مقارنتها وتقييمها. الخواص الميكانيكية (الصلادة ومعدل البلى) للعينات تم تحديدها باستخدام مقاييس ملائمة. بينت النتائج ان العينات المقساة بالمحلول البوليميري 10 % (polyalkylene glycol) قد اعطت أفضل مجموعة للخواص الميكانيكية عند مقارنتها بالعينات الأخرى التي تم تقسيتها ومراجعتها.} }