@Article{, title={Development of a Semi-Analytical Type Curve of Transient Pressure Response in Complex Well-Reservoir Architectures تطوير موديل شبه تحليلي لاستجابة الضغط العابر في الآبار والمكامن المعقدة}, author={Ibrahim Saeb Salih and Hussain Ali Baker}, journal={Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط}, volume={20}, number={2}, pages={61-69}, year={2019}, abstract={The objective of the conventional well testing technique is to evaluate well- reservoir interaction through determining the flow capacity and well potential on a short-term basis by relying on the transient pressure response methodology. The well testing analysis is a major input to the reservoir simulation model to validate the near wellbore characteristics and update the variables that are normally function of time such as skin, permeability and productivity multipliers.Well test analysis models are normally built on analytical approaches with fundamental physical of homogenous media with line source solution. Many developments in the last decade were made to increase the resolution of transient response derivation to meet the complexity of well and flow media. Semi-analytical modeling for the pressure transient response in complex well architecture and complex reservoirs were adopted in this research. The semi analytical solution was based on coupling the boundary condition of source function to the well segment. Coupling well-reservoir on sliced based technique was used to re-produce homogenous isotropic media from several source functions of different properties. The approach can model different well geometries penetrated complex reservoirs. A computer package was prepared to model the pressure transient response of horizontal, dual-lateral, multi-lateral wells in complex anisotropic reservoirs, multilayered, compartmentalized, system of various boundary conditions such as: bottom support aquifers, edge supported, gas caps, interference of injection. The validity of the proposed model was successfully checked by using the commercial simulator.

الهدف من فحوصات الضغط الانتقالي التقليديه للابار هو لتقييم التوصيليه بين البئر والمكمن عن طريق استحصال معامل التوصيليه المعرف بالسمك الفعال للطبقه والنفاذيه الفعاله للمكمن بالاضافه لحساب القابليه الانتاجيه للبئر. حسابات فحوصات الضغط الانتقالي هو خطوه مهمه لتقييم المكامن النفطيه والغازيه وكذلك ادائيه الابار المنتجه وابار الحقن, وتعتبر نتائجه مدخل مهم للمحاكاه المكمنيه للتنبؤ بهبوط الضغط والانتاج المستقبليه. الهدف من هذه البحث هو أخذ مقاربة نموذج شبه تحليلي لاستجابة الضغط العابر في بنية البئر المعقدة والخزانات المعقدة. الحل شبه التحليلي يعتمد على اقتران الشرط الحدودي لداله المصدر بجزء البئر. مبدأ ربط البئر بالمكمن يعتمد على داله المصدر النقطي بأخذ مقطع من المكمن والبئر وتحليله ثم ربطه بالمقطع الاخر عدديا بأخذ بنظر الاعتبار هبوط الضغط بالبئر بين مقطعين وهبوط ضغط المكمن. التقنية تستند إلى إعادة إنتاج الوسائط مجزئه متجانسة من عدة دوال مصدريه من خصائص مختلفة. يمكن محاكاه من هذا الموديل نماذج هندسية مختلفة مخترقه المكامن المعقدة. تم صياغه برنامج محاكاه باستخدام لغه البرمجه بايثون أعدت للتنبأ لاستجابة الضغط للآبار الأفقية والثنائية والمتعددة الأطراف في مكامن متباينة الخواص ومتعددة الطبقات ومجزأة وأنظمة ظروف حدودية مختلفة مثل: طبقات المياه الجوفية الداعمة للأسفل والحافة المدعومة وأغطية الغاز وتداخل الحقن . تم التحقق من النموذج بالمقارنه مع برنامج محاكاة تجاري} }