TY - JOUR ID - TI - Properties characterization of plasticized polylactic acid /Biochar (bio carbon) nano-composites for antistatic packaging تشخيص مواصفات المتراكب لملدن البولي لاكتك اسد مع الكاربون الحيوي في الاغلفه ضد الكهربائيه الساكنه AU - Saif Mohammed Jasim سيف محمد جاسم AU - Nadia Abbas Ali نادية عباس علي PY - 2019 VL - 17 IS - 42 SP - 13 EP - 26 JO - Iraqi Journal of Physics المجلة العراقية للفيزياء SN - 20704003 26645548 AB - A new type of light-weight nanocarbon prepared by the spray-drying method to obtain particle size of 21.7 nm based on the polylactic acid biodegradable film in antistatic packaging. Biocarbon (biochar) is the carbon derived from plants, and soils to naturally absorb and store carbon dioxide from the atmosphere because it is renewability. Therefore it has been used to reinforce biodegradable polylactic acid (PLA) to obtain 100 % recyclable material. Plasticizer thymol of polylactic acid and biochar (biocarbon) were used as composites were prepared by a solution casting method with (0.5-10) wt% biochar. The films were characterized using FTIR, electrical conductivity, mechanical properties, contact angle and color and brightness were studied. Results showed that electrical conductivity of increased with increased biochar making the composite less resistive and suitable for use as antistatic packaging for the transportation and storage of electronic components. Mechanical tests showed reduced tensile strength and tensile modulus but increased in elongation. Also Tear Resistance and Hardness decreased because used thymol as plasticizers at PLA/thymol (95/5) and films composites change from brittle to ductile. The results of the contact angle of pure PLA is 83◦ means hydrophobic materials and decreased to 54◦ at PLA/thymol/biochar 10% to obtain hydrophilic materials which is able to dissipate or promote the decay of static electricity and improve the processability of the electronic device. Optical properties such as color and brightness showed decreased but suitable for antistatic packaging and became opacity at 10% biochar.

تم تحضير نوع جديد من الكاربون النانوي بطريقه التجفيف – الرش وتم الحصول على الجسيمات بحجم حبيبي 21.7 نانو متر استخدم مع البوليمر الحيوي المتحلل البولي لاكتك اسد في تطبيق الاغلفه ضد الكهرباء الساكنه. الكاربون الحيوي المستخدم تم الحصول عليه من النبات والاشجار الذي يمتص غاز ثاني اوكسيد الكاربون القابل للتجديد. تم استخدامه كمواد تقويه في البولي لاكتك اسد الحيوي للحصول على متراكب متحلل بنسبه 100%.تم استخدام الملدن الثايمول مع المتراكب بولي لاكتك اسد والكاربون الحيوي لتحضير المتراكب بطريقه الصب بنسب مئويه وزنيه تراوحت بين (0.5-10) wt%, تم التشخيص باستخدام تحويلات فورير للاشعه تحت الحمراء والتوصيليه الكهربائيه والخواص الميكانيكيه وزاويه التماس واللون وشده السطوع. اظهرت النتائج بان التوصيليه الكهربايه تزداد مع زياده نسبه الكاربون الحيوي والتي تجعل المتراكب ذات فائدة ومناسب لاستخدامه في التغليف المضاد للكهرباء. اما الفحوصات الميكانيكيه اظهرت انخفاض في معدل الشد ومعامل الشد مع زياده في معدل الاستطاله ومقاومه التمزق والصلادة بسبب استخدام الثايمول كملدن بنسبه 5% وبذلك تتغير الماده من السلوم الهش الى اللدن. نتائج زاويه التماس للبوليمر بولي لاكتك اسد هي 83◦ والتي تبين بان الماده كاره للماء وانخفضت في المتراكب لتصل الى ◦54 لتتحول الى السلوم المحب للماء الذي يعمل على تقليل من الكهرباء والشحنات المتولده على السطح وتحسين قابليه الغلاف. نتائج فحص اللون والسطوع انخفضت بشكل قليل ولكنها مناسبه للتغليف ضد الكهربائية الساكنه وازدات عتوميه عند النسبه 10 % من الكاربون الحيوي. ER -