@Article{, title={Characterization Performance of Monocrystalline Silicon Photovoltaic Module Using Experimentally Measured Data دراسة توصيفية لأداء نموذج المعاملات الخمسة لوحدة الطاقة الشمسية الكهروضوئية أحادية البلورية باستخدام بيانات مقاسة تجريبياً}, author={Emad Talib Hashim عماد طالب هاشم and Mena Safaa Mohammed مينا صفاء محمد}, journal={Journal of Engineering مجلة الهندسة}, volume={25}, number={10}, pages={1-19}, year={2019}, abstract={Solar photovoltaic (PV) system has emerged as one of the most promising technology to generate clean energy. In this work, the performance of monocrystalline silicon photovoltaic module is studied through observing the effect of necessary parameters: solar irradiation and ambient temperature. The single diode model with series resistors is selected to find the characterization of current-voltage (I-V) and power-voltage (P-V) curves by determining the values of five parameters (I_Ph 〖,I〗_S,I_rs,R_Sh,A). This model shows a high accuracy in modeling the solar PV module under various weather conditions. The modeling is simulated via using MATLAB/Simulink software. The performance of the selected solar PV module is tested experimentally for different weather data (solar irradiance and ambient temperature) that is gathered from October 2017 to April 2018 in the city of Baghdad. The collected data is recorded for the entire months during the time which is limited between 8:00 AM and 1:00 PM. This work demonstrates that the change in a cell temperature is directly proportional with the PV module current, while it is inversely proportional with the PV module voltage. Additionally, the output power of a PV module increases with decreasing the solar module temperature. Furthermore, the Simulink block diagram is used to evaluate the influence of weather factors on the PV module temperature by connecting to the MATLAB code. The best value from the results of this work was in March when the solar irradiance was equal to 1000 W/m2 and the results were:Isc,exp=3.015, Isc,mod=3.25 , RE=7.79 and Voc,exp=19.67 ,Voc,mod=19.9 ,RE=1.1

برز نظام الطاقة الشمسية الكهروضوئية كواحدة من أكثر التقنيات الواعدة لتوليد الطاقة النظيفة. تمت دراسة أداء الوحدة الشمسية الضوئية السليكونية أحادية البلورية في هذا العمل من خلال ملاحظة تأثير معاملين مهمين هما: إشعاع الشمسي ودرجة حرارة المحيط. يتم اختيار نموذج الصمام الثنائي مع المقاومات المربوطة بالتسلسل لإيجاد توصيف منحنيات الجهد-التيار و الجهد-الطاقة من خلال تحديد قيم معايير الوحدة الشمسية الخمسة. هذا النموذج يبين دقة عالية في نمذجة وحدة الطاقة الشمسية الكهروضوئية تحت ظروف الطقس المختلفة. يتم محاكاة النمذجة باستخدام برنامج الماتلاب-السميولنك. تم اختبار أداء الوحدة الكهروضوئية الشمسية تجريبيًا في مدى محدد من قيم الإشعاع الشمسي ودرجة الحرارة المحيطة والتي يتم جمعها من أكتوبر 2017 إلى أبريل 2018 في مدينة بغداد. تم تدوين البيانات التي جمعها للأشهر المختارة خلال الفترة الزمنية المحددة بين 8:00 صباحًا الى 1:00 مساءً. يوضح هذا العمل أن التغيير في درجة حرارة وحدة الطاقة الشمسية يتناسب طرديًا مع قيمة تيار وحدة الطاقة الكهروضوئية ، بينما يتناسب عكسياً مع قيمة وحدة الجهد الكهربائي. بالإضافة إلى ذلك ، تزداد الطاقة المنتجة من الوحدة الكهروضوئية مع انخفاض درجة حرارة الوحدة الشمسية. علاوة على ذلك, يتم استخدام مخطط التصميم للسميولنك لتقييم تأثير العوامل الجوية على درجة حرارة الوحدة الكهروضوئية عن طريق الربط ببرنامج الماتلاب. افضل نتيجة تم الحصول عليها من النتائج المذكورة في الدراسة في شهر اذار حيث الاشعاع الشمسي 1000 واط/م2هي : Isc,exp= 3.015, Isc,mod=3.25 , RE=7.79&Voc,exp=19.67 , Voc,mod= 19.9 , RE=1.1} }