TY - JOUR ID - TI - Preparation of Nano Silica particles by laboratory from Iraqi sand and added it to concrete to improve hardness specifications تحضير دقائق السيليكا النانوية مختبريا من الرمال العراقية واضافتها الى الخرسانة لتحسين مواصفات التصلب AU - Dr. Khalid A. Sukkar د. خالد عجمي سكر AU - Shatha F. Khaleel شذى فاضل خليل AU - Kareem Th. Shnaihej كريم ثامر شنيهج PY - 2019 VL - IS - 24 SP - E36 EP - E58 JO - Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية SN - 22205381 27101096 AB - Concrete is the most common material used for construction purposes as well as in the lining of oil wells. In this work, the concrete specifications are improved through the preparation of Nano silica particles (SiO2) by laboratory from Iraqi sand and added to the concrete, which gives results with a large gap in the test of compressive strength after the addition of silica nanoparticles prepared to the concrete mixtures compared to the same mixtures without the addition of silica, to give high hardness and great capacity for bearing of compressive strength as well as increase the resistance to water penetration during the concrete structure and especially the padded cement for the oil well. In this research, Nano silica particles are prepared from the Iraqi sands available in large quantities in the cities of Iraq. The two types of sand are used: the first one is the sand of the Akheider area in Karbala province and the second is the sand of the western region in Anbar province. The Nano silica particles have been prepared in two ways: chemical and physical methods (milling method).The specifications of the prepared materials are measured by several diagnostic devices, including the scanning electron microscope (SEM), the particle size analyzer apparatus, the X-ray diffraction (XRD) and the infrared spectrometer (FTIR). The results of this project proves the possibility of producing Nano silica particles with high purity and excellent specifications, which can be invested for the commercial purposes in the future.In this research, two types of cement are used. The first is class G cement used for lining the oil wells, and the second is the Iraqi cement resistant (Portland cement) (Tasuloga Company / Sulaymaniyah province) used in the building construction. The prepared Nano silica is added to the cement at rates ranging from 0.25, 0.5, 1 and 2% by weight, with fixed of cement amount, water, and mixed the mixture well by standard mixing machine and poured into mold cubes (5 x 5 x 5 cm) according to US specifications.In the concrete that used of the buildings construction, it is conducted a mixture of cement and normal sand (to both of two types of sands) and added the prepared Nano silica by a percentage ratio, and poured into a cubic templates, then conducting the tests of compressive strength which is of great importance in determining the strength of prepared concrete.The results indicates that the hardness of the concrete containing Nano materials is significantly increased and reached a level exceeding 4000 PSIG when adding 1% of the silica nanoparticles to the cement used.On the other hand, the results shows that the Nano materials in the concrete because of their high surface area reduced the permeability of the water into the concrete structure because these substances are hydrophobic, which reduces the permeability of sulfate ions and salts, which prolong the life of the concrete for long periods of time especially in wells Oil, so this research is of great economic importance in the investment of Iraqi wealth for the production of new engineering materials.

تعتبر الخرسانة هي المادة الأكثر شيوعا المستخدمة لأغراض البناء وكذلك في عمليات تبطين الآبار النفطية. لذلك في هذا البحث تم تحسين مواصفات صلابة الخرسانة من خلال اضافة السيليكا النانوية SiO2 التي تم تحضيرها مختبريا من الرمال العراقية و التي اعطت نتائج بفارق كبير بفحص الانضغاطية compressive strength بعد اضافة السيليكا النانوية التي تم تحضيرها الى الخلطات الكونكريتية بالمقارنة بنفس الخلطات بدون اضافة السيليكا، لتعطي صلادة عالية وطاقة كبيرة للتحمل او الانضغاط فضلاً عن زيادة مقاومتها لنفاذ الماء خلال الهيكل الكونكريتي وبالخصوص السمنت المبطن للبئر النفطي. في هذا البحث تم تحضير السيليكا النانوية SiO2من الرمال العراقية المتوفرة بكميات كبيرة في محافظات العراق. حيث تم استخدام نوعين من الرمال الأول رمال منطقة الاخيضر في محافظة كربلاء والثاني رمال المنطقة الغربية في محافظة الانبار. وقد تم تحضير SiO2النانوية بطريقتين هما الطريقة الكيميائية والطريقة الفيزياوية (طريقة الطحن). وتم قياس مواصفات المواد المحضرة بعدة اجهزة تشخيصية منها المجهر الالكتروني الماسح SEM، وجهاز قياس الحجم الحبيبي للدقائق Particle Size Analyzer ، وجهاز حيود الاشعة السينية XRD ومطياف الاشعة تحت الحمراءFTIR . أثبتت نتائج هذا المشروع أمكانية أنتاج السيليكا النانوية بنقاوة ومواصفات عاليتين والتي من الممكن استثمارها لإغراض تجارية مستقبلا وبشكل اقتصادي.في هذا البحث تم استخدام نوعين من الاسمنت، الأول هو الاسمنت نوع G المستخدم في تبطين الآبار النفطية، والثاني الاسمنت البورتلاندي العراقي المقاوم للأملاح ( شركة طاسلوجة / محافظة السليمانية). تم إضافة SiO2 النانوية المحضرة الى الاسمنت بنسب تراوحت بين (0.25 ,0.5, 1, %(2 وزناً مع تثبيت كمية الأسمنت و الماء و أعداد الخلطة و صبها في قوالب مكعبة الشكل (5×5×5 ) سم وحسب المواصفات الأميركية. اما في الخرسانة الخاصة بالمباني فتم عمل خلطة من الأسمنت و الرمل غير المعامل (رمل الاخيضر ورمل المنطقة الغربية) مع نسبة من السليكا المحضرة مع تثبيت كمية الأسمنت و الماء و صبها في القالب. تم التركيز على أجراء اختبارات الانضغاطية (compressive strength ) لمالها من أهمية كبيرة في تحديد قوة الخرسانة المحضرة.أظهرت النتائج زيادة صلابة الخرسانة الحاوية على المواد النانوية بشكل كبير وملفت للنظر تصل الى مستوى تجاوز 4000 Psig عند إضافة 1% من السيليكا النانوية الى الأسمنت المستخدم. ومن جانب اخر أوضحت النتائج ان المواد النانوية الموجودة في الخرسانة وبسبب مساحتها السطحية العالية أدت الى تقليل نفاذية الماء الى داخل الهيكل الكونكريتي كون هذه المواد كارهة للماء (Hydrophobic)مما يؤدي الى تقليل نفاذية ايونات الكبريتات والأملاح مما يطيل عمر الخرسانة لفترات زمنية طويلة وخاصة في الآبار النفطية، لذلك يعتبر هذا البحث ذو أهمية اقتصادية كبيرة في استثمار الثروات العراقية من اجل أنتاج مواد هندسية جديدة. ER -