TY - JOUR ID - TI - NUMERICAL AND EXPERIMENTAL STUDY THE EFFECT OF (SiO₂) NANOPARTICLES ON THE PERFORMANCE OF DOUBLE PIPE HEAT EXCHANGER AU - Muna Sabah Kassim AU - Shaymaa Fahad Lahij PY - 2019 VL - 23 IS - 5 SP - 148 EP - 171 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - Numerical and experimental investigation of the heat transfer and the friction factor characteristics in a counter flow double pipe heat exchanger with and without Nano fluid was studied. Tests are performed for fully developed turbulent flow ranges, homogeneous Nano fluid. The double pipe heat exchanger consisting of two tubes, the first inner plain tube which has been manufactured from copper materials with inner and outer diameters of (11.2 and 12.7) mm respectively, the length of first inner plain tube is 1057 mm. The second insulated an external tube which has been manufactured from PVC material with inner and outer diameters of (44.4 and 50)mm respectively, with length is 1032mm. The flows has been tested at Reynolds number ranging (3019.43-4824.22). Nano particle size ranging (15-20)nm. The results show that the heat transfer rate increases as Reynolds number and volume concentration of Nano fluid increase. The increasing percentage of Nusselt number, friction facto and performance factor of (15.72,11.51 and 11.57) % respectively for maximum volume concentration and volume flow rate of 3% and 1.6 lpm respectively. ANSYS FLUENT 2015 package used to simulate the heat transfer and the fluid flow in the heat exchanger. The results show that the heat transfer increases when Nano fluid was added. The agreement observed with experimental work with maximum discrepancy 12%.

ER -