@Article{, title={Modeling of Bending Properties of Stainless Steel 304 Sheets Welded by Tungsten Inert Gas Welding Process نمذجة خواص الانحناء لصفائح الصلب المقاوم للصدأ 304 الملحومة بعملية لحام التنكستن مع الغاز الخامل}, author={Ali Hussein Alwan علي حسين علوان}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={15}, number={4}, pages={10-22}, year={2019}, abstract={In this research, the effects of both current and argon gas pressure on the bending properties of welded joints were studied. Using the possible ranges of welding gas pressures and currents, Tungsten inert gas welding (TIG) of stainless steel (304) sheet was used to obtain their influence on the maximum bending force of the (TIG) welded joints. Design of experiment (DOE) ‘version 10' was used to determine the design matrix of experiments depending on the used levels of the input factors. Response surface methodology (RSM) technique was used to obtain an empirical mathematical model for the maximum bending force as a function of welding parameters (Current and Argon gas pressure). Also, the analysis of variance (ANOVA) was used to verify the adequacy of the resulted model statistically.

في هذا البحث، تم دراسة تأثير كل من ضغط غاز الأركون والتيار على خواص الانحناء للوصلات الملحومة. باستخدام المديات الممكنة لضغوط وتيارات غاز اللحام ، تم استخدام لحام غاز التنغستن الخامل (TIG) للفولاذ المقاوم للصدأ (304) لايجاد تأثيره على أقصى قوة انحناء للمفاصل الملحومة بلحام (TIG). تم استخدام برنامج تصميم التجارب (DOE)، الإصدار العاشر لتحديد مصفوفة تصميم التجارب بالاعتماد على المديات المستخدمة لعوامل الادخال وتم استخدام تقنية منهجية سطح الاستجابة (RSM) للحصول على نموذج رياضي تجريبي للاستجابة لقوة الانحناء القصوى بوصفها دالة لعوامل اللحام (التيار وضغط غاز الأركون) وتم أيضاً أستخدام تحليل التباين (ANOVA) للتحقق إحصائياً من ملائمة النموذج الناتج.} }