TY - JOUR ID - TI - Effect of Maximum Size of Aggregate on the Behavior of Reinforced Concrete Beams Analyzed using Meso Scale Modeling تأثير المقاس الاقصى للركام على سلوك الاعتاب الخرسانيه المسلحة التي تم تحليلها بأستخدام انموذج النطاق متوسط المدى AU - Eman Abbas ايمان عباس AU - Alaa H. AlZuhairi علاء حسين الزهيري PY - 2020 VL - 26 IS - 5 SP - 143 EP - 155 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - In this study, simply supported reinforced concrete (RC) beams were analyzed using the Extended Finite Element Method (XFEM). This is a powerful method that is used for the treatment of discontinuities resulting from the fracture process and crack propagation in concrete. The mesoscale is used in modeling concrete as a two-phasic material of coarse aggregate and cement mortar. Air voids in the cement paste will also be modeled. The coarse aggregate used in the casting of these beams is a rounded aggregate consisting of different maximum sizes. The maximum size is 25 mm in the first model, and in the second model, the maximum size is 20 mm. The compressive strength used in these beams is equal to 26 MPa. The subjects of this study are two RC beams subjected to a two-point loading designed to fail due to flexure. The RC beams under loading were studied in the laboratory as well as numerically. ABAQUS program was used for modeling and analyzing the RC beams. The mesoscale modeling that was used to model the concrete required used a special program using different programs but has not used the ABAQUS program directly. The result of the comparison between the numerical and experimental showed that the mesoscale numerical model gave results that were more approximate to the experimental ones, and the mesoscale modeling of reinforced concrete is most convenient when the maximum size of aggregate is decreased.

في هذه الدراسة, تم تحليل الاعتاب الخرسانة المسلحة (RC) المسندة أسنادا بسيطا (Simply Supported) بأستخدام طريقة العناصر المحددة الممتدة (XFEM).الطريقة هذه تكون فعالة حيث تستخدم للتعامل مع حالات عدم الاستمرارية الناتجة من عملية الكسر وانتشار الشقوق في الخرسانة. يستخدم النطاق متوسط المدى لنمذجة الخرسانة كمادة ثنائية الطور تتكون من الركام الخشن والعجينة الاسمنتية. كذلك سيتم نمذجة الفراغات الهوائية الموجودة في عجينة الاسمنت. الركام الخشن المستخدم لصب الاعتاب هو ركام مدور لكن مختلف بالمقاس الاقصى. في النموذج الاول استخدم ركام بمقاس اقصى 25 ملم وفي النموذج الثاني استخدم ركام ذو مقاس اقصى 20 ملم. مقدار مقاومة الانضغاط لهذه الاعتاب هي 26 ميكاباسكال.سيتم دراسة اثنين من الاعتاب الخرسانية المسلحة المعرضة للتحميل النقطي الثنائي تم تصميمها لتفشل نتيجة الانحناء. الاعتاب الخرسانية المسلحة تم دراستها مختبريا وكذلك بشكل عددي. استخدم برنامج (ABAQUS) لنمذجة وتحليل الاعتاب الخرسانية المسلحة. لنمذجة الخرسانة بأستخدام النطاق المتوسط المدى (Meso-Scale) تطلب أستخدام برمجة خاصة بأستخدام برامج اخرى ولم يتم استخدام برنامج ال ABAQUS يشكل مباشر للبرمجه. اظهرت مقارنة النتائج العددية مع المختبرية بان النمذجة بأستخدام النطاق المتوسط المدى يعطي نتائج متقاربة جدا من النتائج المحسوبة مختبريا. ER -