TY - JOUR ID - TI - Flexural Behavior of Reinforced Concrete Beams Reinforced with 3D-Textile Composite Fiber سلوك العتبات الخرسانية المسلحة والمعززة بالألياف النسيجية المركبة ثلاثية الابعاد AU - Mays R. Abdulghani ميس ربيع عبد الغني AU - Ahmed S. Ali احمد سلطان علي PY - 2020 VL - 26 IS - 7 SP - 127 EP - 144 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Normal concrete is weak against tensile strength, has low ductility, and also insignificant resistance to cracking. The addition of diverse types of fibers at specific proportions can enhance the mechanical properties as well as the durability of concrete. Discrete fiber commonly used, has many disadvantages such as balling the fiber, randomly distribution, and limitation of the Vf ratio used. Based on this vision, a new technic was discovered enhancing concrete by textile-fiber to avoid all the problems mentioned above. The main idea of this paper is the investigation of the mechanical properties of SCC, and SCM that cast with 3D AR-glass fabric having two different thicknesses (6, 10 mm), and different layers (1,2 layers). As well as micro-steel fiber with 1.25% volume fraction was used. Sixteen rectangular reinforced concrete beam specimens have been tested to study the behavior of their flexural strength. The results concluded that utilizing 3D-TFs with mortar mixture gave significantly higher enhancement for the load-carrying capacity than the concrete mixture. The utilization of 3D-TFs and micro-steel fiber together in the SCM mix gave better results. The stiffness of the specimens was improved with increasing the thickness and the number of textile fiber layers.

الخرسانة العادية ضعيفة تجاه قوة الشد، ولديها ليونة منخفضة ومقاومة ضئيلة للتكسير. يمكن أن تؤدي إضافة أنواع مختلفة من الألياف بنسب محددة إلى تعزيز الخواص الميكانيكية بالإضافة إلى المتانة. تحتوي الألياف المنفصلة المستخدمة بشكل شائع على العديد من العيوب مثل تكتل (تكور) الألياف في الخليط الخرساني وكذلك التقيد في نسبة الالياف التي يمكن استخدامها. بناءً على هذه الرؤية، تم اكتشاف تقنية جديدة يمكن ان تعزز الخرسانة بواسطة ألياف النسيج لتجنب جميع المشكلات المذكورة أعلاه. الفكرة الرئيسية لهذه الورقة هي دراسة الخواص الميكانيكية للخليط الخرساني الذاتي الدمك SCC وخليط المونة الذاتي الدمك SCM المصبوب مع الالياف النسيجية الزجاجية الثلاثية الابعاد (3D-TFs) لها سمكان مختلفان (6، 10 مم)، واستخدام طبقات مختلفة (1،2 طبقة). وكذلك تم استخدام الألياف الفولاذية الدقيقة بنسبة 1.25 ٪. تم اختبار ستة عشر عينة من العتبات الخرسانية المسلحة المستطيلة لدراسة سلوك الانثناء. لخصت النتائج أن استخدام الالياف المنسوجة الثلاثية الابعاد مع خليط المونة الذاتي الدمك أعطى تحسنا لقدرة الحمل أعلى بكثير من خليط الخرسانة الذاتي الدمك. استخدام الالياف المنسوجة الثلاثية الأبعاد والياف الحديد معًا في خليط المونة (SCM) اعطى نتائج أفضل. تمت زيادة صلابة العتبات الخرسانية مع زيادة سمك وعدد طبقات الالياف النسيجية. ER -