TY - JOUR ID - TI - Reuse of Brick Waste as a Cheap-Sorbent for the Removal of Nickel Ions from Aqueous Solutions إعادة استخدام نفايات الطابوق كمادة رخيصة لإزالة ايونات النيكل من المحاليل المائية AU - Teba H. Mhawesh طيبه مهاوش AU - Ziad T. Abd Ali زياد عبد علي PY - 2020 VL - 21 IS - 2 SP - 15 EP - 23 JO - Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط SN - 19974884 26180707 AB - The potential application of granules of brick waste (GBW) as a low-cost sorbent for removal of Ni+2ions from aqueous solutions has been studied. The properties of GBW were determined through several tests such as X-Ray diffraction (XRD), Energy dispersive X-ray (EDX), Scanning electron microscopy (SEM), and BET surface area. In batch tests, the influence of several operating parameters including contact time, initial concentration, agitation speed, and the dose of GBW was investigated. The best values of these parameters that provided maximum removal efficiency of nickel (39.4%) were 1.5 hr, 50 mg/L, 250 rpm, and 1.8 g/100mL, respectively. The adsorption data obtained by batch experiments subjected to the Three isotherm models called Langmuir, Freundlich and Elovich, The results showed that the Freundlich isotherm model described well the sorption data (R2=0.9176) in comparison with other models. The kinetic data were analyzed using two kinetic models called pseudo-first-order and pseudo-second-order. The pseudo-first-order kinetic model was found to agree well with the experimental data.

تمت دراسة امكانية تطبيق حبيبات مخلفات الطوب (GBW) كمواد منخفضة التكلفة لإزالة أيونات Ni +2 من المحاليل المائية. تم تحديد خصائص GBW من خلال العديد من الفحوصات مثل حيود الأشعة السينية (XRD) ، الأشعة السينية المشتتة للطاقة (EDX) ، المجهر الإلكتروني المسح الضوئي (SEM) ، والمساحة السطحية. في اختبارات الدُفعات ، تم فحص تأثير العديد من العوامل بما في ذلك وقت الاتصال والتركيزالابتدائي وسرعة الرج وجرعة GBW. كانت أفضل قيم المعاملات التي وفرت أقصى كفاءة إزالة للرصاص (39.4%) : 1.5hr ، 50mg/l ، 250rpm ، و g/100ml 1.8 ، على التوالي. بيانات الامتصاص التي تم الحصول عليها من خلال تجارب الدُفعات التي خضعت لنماذج isotherm الثلاثة المسماة (Langmuir ، Freundlich ،و (Elovich. أظهرت النتائج أن نموذج Freundlich وصف بشكل جيد بيانات الامتصاص (=0.9176 R2) بالمقارنة مع النماذج الأخرى. وقد تم تحليل البيانات الحركية باستخدام نموذجين : pseudo-first-order و pseudo-second-order ). تم ايجاد ان pseudo-first-order يمثل جيدا البيانات التجريبية. ER -