@Article{, title={PREDICTION AND ENHANCEMENT OFTHICKNESS REDUCTION IN MULTI-POINT FORMING PROCESS USING ANOVA ALGORITHM تخمين وتحسين انخفاض السمك الحاصل في عملية التشكيل المتعدد النقاط باستخدام خوارزمية تحليل التباين}, author={Tahseen Fadhel Abaas Karem MohsenYounis Khalida kadhim Mansor تحسين فاضل عباس كريم محسن يونس خالدة كاظم منصور}, journal={Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد}, volume={19}, number={1}, pages={91-104}, year={2019}, abstract={Multipoint forming is an engineering concept which means that the working surface of the die and/or punch is made up of hemispherical ends of individual active elements (called pins), where each pin can be independently, vertically displaced using a geometrically reconfigurable die, precious production time is saved because several different products can be made without changing tools. The aim of this work is to present the effect of many parameters (blank Holder types, rubber thickness and forming speed) on the reduction of thickness for brass with 0.71 mm thickness. This research is concentrate on the development of predictive models to estimate the minimum deviation in thickness using analysis of variance (ANOVA), minimum thickness deviation has been modeled. In the development of this predictive model, blank holder, rubber thickness and forming speed have been considered as model parameters. Arithmetic the minimum thickness deviation used as response parameter to assess the thickness reduction of Multipoint forming parts. The data required has been generated, compared and evaluated to the proposed models that obtained from experiments. Taguchi algorithm is used to predict the effect of forming parameters on thickness reduction in forming process of Brass (65-35) based on orthogonal array of L9. The analysis of variance was used to find the best factors that effect on the thickness deviation, The result of this research is the contribution of blank holder types, rubber thickness and forming speed with respect to minimum thickness deviation is (69.195, 18.1 and 12.733) % respectively.

التشكيل المتعدد النقاط هو مفهوم هندسي الذي يعنى بتشكيل السطح باستخدام قالب علوي وسفلي متكون من عدد ذات نهايات شبه كروية والتي يكون فيها كل عدة تشكيل مستقرة وموضوع بشكل ملائم نسبة للسطح المراد تشكيله والتي تعتبر من العمليات الواطئة الكلفة والسريعة لكونها تتمكن من انتاج منتجات متعددة لنفس القالب, في هذه الدراسة سيتم دراسة تاثيرات متغيرات عملية التشكيل (نوع مثبت المنتج, سمك طبقة المطاط وسرعة عملية التشكيل) على تغير السمك الناتج لسبيكة البراص بسمك (0.71ملم) . تقوم العدة بعملية التشكيل بشكل موقعي وفق عملية التشويه بالتمدد. تم في هذا البحث تطوير موديل لتخمين مقدار التخصر الحاصل بالسمك. وباستخدام خوارزمية تحليل التباين تم تكوين الموديل الرياضي لنسبة التخصر بالنسبة لنوع المثبت وسمك طبقة المطاط وسرعة عملية التشكيل حيث تم اختبار البيانات المطلوبة ومقارنتها مع النتائج العملية وحساب مقدار التطابق وتاثير كل متغير للعملية. تم استخدام خوارزمية تاكوشي لتخمين متغيرات العملية على تغير السمك لتشكيل صفيحة براص (65-35) باستخدام مصفوفة (L9) وايجاد اكثر متغير له تاثير على مخرجات العملية. تم الاستنتاج من هذا البحث بان نسبة تاثير نوع مثبت المنتج، سمك طبقة المطاط وسرعة عملية التشكيل على التغير بالسمك هي (69.195 ، 18.1 و 12.733)٪ على التوالي.} }