TY - JOUR ID - TI - Production of Self-Compacting Concrete Using Limestone Powder إنتاج خرسانة ذاتية الرص باستعمال مسحوق الحجر الجيري AU - Ali T. Jasim PY - 2011 VL - 9 IS - 1 SP - 87 EP - 100 JO - journal of kerbala university مجلة جامعة كربلاء SN - 18130410 AB - Self-compacting concrete (SCC) is a very important advance in the concrete technology in recent time. It is a new type of high performance concrete with the ability of flowing under its own weight and without the need of vibrations. Due to its specific properties, SCC may contribute to a significant improvement of the quality of concrete structures and open up new field for the application of concrete. This study aims to check whether the fresh properties of self compacting concrete mixed by the Nan Su et al., [1] method and using limestone filler comply with the requirements specified by the ACI Committee 237. In this study, four values of cement content 200, 250, 300 350 kg/m3 are used. The maximum aggregate size of 20 mm was used. The contents of limestone powder for each cement content were 165, 139, 116, and 96 kg/m3 respectively. Fresh performance of self compacting concrete was determined by slump flow, J-ring and column segregation. The results showed that the workability of all studied mixes is good, with slump flow diameter range between 570 to 630 mm. The difference between slump flow diameter and J-ring diameter is not exceed 50 mm, while the segregation resistance range between 10 and 15%. These results showed that the self compacting concrete used was complied with the requirements specified by the ACI Committee 237. The results also showed that the volume of coarse aggregate, paste fraction, mortar fraction and powder content were 0.294 m3/m3, 0.32 m3/m3, 0.69 m3/m3 and 446 kg/m3 respectively, which meet the lower limits requirements of ACI Committee 237. Further, to obtain self compacting concrete with 15 to 30 MPa compressive strength, the content of cement required is only 200 to 350 kg/m3.

تعتبر الخرسانة ذاتية الرص تطورا هام جدا في تكنولوجيا الخرسانة في الوقت الحاضر, وهي نوع جديد من الخرسانة عالية الأداء التي تكون لها القابلية على الانسياب تحت تأثير وزنها الذاتي دون الحاجة إلى استعمال الهزازات. إن الخرسانة ذاتية الرص وبسبب خواصها المميزة ربما تسهم بتحسين مهم في نوعية المشاءات الخرسانية وتفتح حقل جديد في تطبيقات الخرسانة. تهدف الدراسة إلى بيان فيما إذا كانت الخواص الطرية للخرسانة ذاتية الرص المنتجة من مسحوق الحجر الجيري تطابق متطلبات المواصفة الأمريكية للخرسانة ذاتية الرص والمصممة وفقا لطريقة Nan Suتم استعمال أربع قيم لمحتوى السمنت 200, 250, 300, و350 كغم/م3, المقاس الأقصى للركام الخشن 20 ملم وأضيف مسحوق الحجر الجيري بمقدار 165 ,139 ,116 و 96 كغم/م3 لكل محتوى من محتويات الاسمنت المذكورة على التوالي. أظهرت الدراسة بان نتائج فحوص قابلية التشغيل كانت مطابقة لمتطلبات المواصفة الأمريكية. إضافة إلى ذلك إن حجم كل من الركام, العجينة الإسمنتية والمونة وكذلك محتوى المسحوق كانت مطابقة للحد الأدنى من متطلبات المواصفة المذكورة. أظهرت النتائج أيضا بإمكانية إنتاج خرسانة ذاتية الرص مصممة بالطريقة المقترحة ذات مقاومة انضغاط من 15 إلى 30 نيوتن/ملم2 وبمحتوى اسمنت من 200 إلى 350 كغم/م3 . ER -