TY - JOUR ID - TI - Effect of Hybrid Modification and Type of Compaction on the Cracking Properties of Asphalt Concrete تأثير المضافات الهجينة ونوع الحدل على خصائص التشققات في الخرسانة الاسفلتية AU - Mohammed A. Abed محمد عاصي عبد AU - Alaa H. Abed علاء حسين عبد PY - 2020 VL - 23 IS - 2 SP - 106 EP - 116 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - This paper focused on evaluating the effect of aggregate gradation and polymer modification on indirect tensile strength (ITS) and the static stiffness for hot asphalt mixtures. In particular, data from ITS tests have been processed to obtain stiffness measurements through the application of Hondros theory. The results showed that fine mixtures had a better tensile strength by 26.3% than the coarse mixtures. The effect of compaction also was examined, the results showed that samples compacted with the Superpave gyratory compactor (SGC) had an enhancement in ITS by 36.58 and 23.1% in comparison with Marshall and roller compactor respectively. Polymer modifiers were used to estimate their effect on tensile strength, adding 4, 6, and 8% of Styrene-Butadiene-Styrene (SBS), which can rise the ITS by 3.2,6.14 and 13.3% of the non-modified asphalt mixture. Furthermore, using 4, 6, and 8 percent of SBS could increase static stiffness by 53.9, 209.6, and 302.4% respectively for roller compacted fine mixes and 58, 220, and 379.3% for SGC compacted mixes. Furthermore, SBS raised the stiffness modulus by 52.3, 188, and 295% for Marshall compacted mixes. Using hybrid modifier can improve the stiffness of the asphalt mixture. However, The results indicate that using 1, 2 and 3% polyvinyl chloride (PVC) can magnify the stiffness of mixtures by 41.2, 199.8% and 262.6 for roller compacted mixtures and 133.4, 212.1 and 354% for SGC compacted mixtures, whereas there is a stringent increasing by 133.4, 189.2 and 354% for Marshall compacted mixes. Otherwise, polymer-modification can decrease the fracturing index for coarse and fine mixturesز

ركزت هذه الورقة على تقييم تأثير تدرج الركام و المضافات البوليميرية على قوة الشد غير المباشرة (ITS) والصلابة الساكنة للخلطات الإسفلتية الحارة على وجه الخصوص ،حيث تمت معالجة بيانات اختبارات ITS للحصول على قياسات الصلابة من خلال تطبيق نظرية هوندروس. وقد أظهرت النتائج أن الخلطات الناعمة كانت لها قوة شد أفضل بنسبة 26.3٪ من الخلطات الخشنة. بالاضافة الى انه تم فحص تأثير الحدل أيضا ، كما وأظهرت النتائج أن العينات المحدولة بجهاز الحدل الدوار( العجن) SGC انه كان لديه القدرة في تعزيز في ITS بنسبة 36.58 و 23.1 ٪ مقارنة مع جهاز حدل مارشال والحادلة الأسطوانية على التوالي. كذلك فقد تم استخدام مضافات بوليمية للاسفلت لمعرفة تأثيرها على مقاومة الشد غير المباشرة ، حيث ان اضافة 4 و 6 و 8 ٪ من SBS يمكن أن يرتفع قيمة ITS بنسبة 3,2 و 6,14 و 13,3 ٪ مقارنة مع الخلطة الاسفلتية غير المعدلة. أيضًا ، وعلى ذلك فأن استخدام 4 و 6 و 8 في المائة من SBS إلى زيادة الصلابة بنسبة 53.9 و 209.6 و 302.4٪ على التوالي للخلطات الناعمة المحدولة بالأسطوانة و 58 و 220 و 379.3٪ مقارنة بالخلطات المحدولة بـ SGC. علاوة على ذلك ، رفعت مادة SBS معامل الصلابة بنسبة 52.3 ، 188، و 395 ٪ للخلطات المحدولة بجهاز مارشال. كما ويمكن أن يؤدي استخدام طريقة التعديل الهجين إلى تحسين صلابة الخلطات الإسفلتية. حيث تشير النتائج إلى أن استخدام 1 و 2 و 3٪ PVC بالماشاركة مع نسبة 4% من مادة SBS يمكنها أن يزيد من صلابة الخلطات بنسبة 41.2 و 199.8٪ و 262.6 للخلطات المحدولة بالأسطوانة و 133.4 و 212.1 و 354٪ للخلطات المحدولة بـ SGC ، في حين أن هناك زيادة صارمة بنسبة 133.4 ، 189.2 و 354٪ للخلطات المحدولة بجهاز مارشال. من ناحية أخرى ، يمكن أن يؤدي تعديل البوليمر إلى تقليل مؤشر التكسير للخلطات الاسفلتية الخشنة والناعمة بصورة عامة. ER -