TY - JOUR ID - TI - Optimization of Plasma Cutting Parameters on Dimensional Accuracy and Machining Time for Low Carbon Steel AU - Vian N. Najm AU - Sami A. Hamood PY - 2020 VL - 38 IS - 8 part (A) Engineering SP - 1160 EP - 1168 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This workaimsto study theinfluence of plasma arc cutting parameters on dimensional accuracy and machining time for mildsteel (1010)material with the thickness (4 mm).Selected three cutting parameters (arc current, cutting speed, and arc distance) orthe experimental work. 12 tests have been performed at each test one parameter has been changed with four variouslevels and other parameters are constant. The influenceof the cutting parameters on response results (dimensional accuracy and machining time) have been studied and analyzed by using response surface methodology (RSM) using the second-order model and main effect plot have been generated of each parameter on response results by using ANOVA depended on results of response surface analysis. The results of the response surface analysisshowed that the importantinfluencing parameters on dimensional accuracy were cutting speed and arc current as well as on deviation of dimensional accuracy, and the machining time is further affected with the current more than the cutting speed and the standoff distance. The outcomesof response surface analysisshowed that the optimal settingof the cutting parameters to obtain athigh dimensional accuracy were (arc current= 110 A, cutting speed = 4000 m/min, arc distance = 2mm) and to obtain on less machining time was (arc current= 110 A, cutting speed = 4000 m/min, arc distance = 5mm).

ER -