TY - JOUR ID - TI - Studying the FRP-Concrete Bond Behavior of Normal and Light-Weight Concrete Using FEM دراسة سلوكية رابطة الخرسانة-ألياف البوليمر للخرسانة الاعتيادية والخفيفة الوزن باستخدام طريقة العناصر المحددة AU - Ali Oday Hilal علي عدي هلال AU - Ahid Zuhair Hamoody عهد زهير حمودي AU - Ahmed Sagban Saadoon احمد صكبان سعدون PY - 2020 VL - 28 IS - 2 SP - 160 EP - 195 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - The main objective of the present study is to investigate the behavior of FRP-concrete bond of two types of concrete (normal and light weight concrete) using different concrete properties. For this purpose, a model of single shear test was selected and modeled using ANSYS program to study the FRP-concrete bond. The modeling was represented in two ways: with epoxy material (epoxy model) and without epoxy material (full bond model). These two models were formulated and used in the analysis process. Different models of two types of concrete (normal and light weight concrete) were analyzed in order to study bond behavior. In general, the full bond model gave results of more good agreement with the available experimental results than the epoxy model. The average difference between the experimental and analytical failure load was 5.35% and 10.32% for the full bond and epoxy model, respectively. It was found that the increasing in compressive strength of concrete leads to increasing in the bond capacity and the greater concrete compressive strength the better utility of the CFRP sheet. As the compressive strength was increased from 20 to 40MPa, the bond strength of normal concrete and light weight concrete models increased by about 81% and 106%, respectively.

ان الهدف الرئيسي من هذه الدراسة هو دراسة سلوكية رابطة الخرسانة-الياف البوليمر لنوعين من الخرسانة (الخرسانة الاعتيادية والخرسانة الخفيفة الوزن) باستخدام خواص خرسانية مختلفة. وتم لهذا الغرض اختيار نموذج اختبار القص الاحادي ونمذجته باستخدام برنامج ANSYS. تم تمثيل النمذجة بطريقتين: بوجود مادة الايبوكسي اللاصقة (نموذج الايبوكسي) وبدون مادة الايبوكسي (نموذج الرابطة التامة). وتم تشكيل هذين النموذجين واستخدامهما في عملية التحليل. حُلّلت نماذج مختلفة من نوعين من الخرسانة (الاعتيادية والخفيفة الوزن) من أجل دراسة سلوك هذه الرابطة. لوحظ بأن نموذج الرابطة التامة أعطى نتائج أكثر توافقاً مع النتائج التجريبية المتاحة وأفضل من نموذج الايبوكسي، إذ إن معدل الفرق بين قوة الفشل التجريبية والتحليلية كان بمقدار 5.35% و8.32% باستخدام نموذجي الرابطة التامة والايبوكسي، على الترتيب. وقد وُجد أن الزيادة في مقاومة انضغاط الخرسانة تؤدي إلى زيادة في مقاومة الرابطة، حيث لوحظ أنه بزيادة مقاومة انضغاط الخرسانة من 20 الى 40MPa فإن مقاومة الرابطة لنماذج الخرسانة الاعتيادية والخفيفة الوزن قد ازدادت بحدود 81% و106%, على الترتيب. ER -