@Article{, title={Immobilization of Nuclear Waste Using Carbon Nanotubes Prepared by Laser Ablation in Liquid Method تثبيت النفايات النووية باستخدام انابيب الكاربون النانوية المحضرة بطريقة الاقتلاع بأستخدام الليزر}, author={Thuraya A. Abdul Hussian ثريا عامر الدفاعي and Ghufran S. Jaber غفران ستار جابر}, journal={Iraqi Journal of Physics المجلة العراقية للفيزياء}, volume={19}, number={49}, pages={32-41}, year={2021}, abstract={Nuclear waste comes from many sources around us and considered as the main source of pollution which threats human’s health and environments. Because of this, we must find a proper treatment, storage, and disposal method of nuclear waste over a long period of time. So, in this research the nuclear waste (Strontium hydroxide) was immobilized by Carbon nanotubes (CNTs). The Nd-YAG laser with wavelength 1064 nm, energy 750 mJ and 100 pulses was used to prepare CNTs. Sr(HO)2 powder was added to the CNTs colloidal in calculated rate to get a homogenous mix of CNTs-Sr(OH)2. The Sr(HO)2 absorbs carbon dioxide from the air to form strontium carbonate so, the new solution is CNTs-SrCo3. To dry the solution three drops from the new solution was placed on glass slides. To investigate the radiation damage on CNTs structure, the sample was irradiated with a beta source (90Sr/90Y) for different periods of time. The structure properties were measured using X-ray diffraction XRD, while the shape and size property was measured with scanning electron microscope SEM. The results showed homogenous distribution of nanoparticles with average particle size of about 20nm. The XRD spectra for all samples before and after β irradiation showed higher peaks at 2θ = 25 degree and when compared the XRD phase with standard card the resultant nanomaterial is strontium carbonite (SrCo3). From SEM micrograph, SrCo3 was well decorated on the surface of CNTs and there was not any remarkable difference in the corresponding due to beta radiation exposure.

في محاولة للتخلص من النفايات النووية التي تشكل تهديدا على صحتنا وبيئاتنا. وجب علينا أيجاد طريقة مناسبة لتثبيت هذه النفايات النووية. لذلك، في هذا البحث تم تثبيت النفايات النووية (هيدروكسيد السترونتيوم) بواسطة أنابيب الكاربون النانوية (CNTs). استخدم في هذا البحث ليزر Nd-YAG بطول موجة 1064 نانومتر، بطاقة 750 mJ و 100 نبضة لتحضير CNTs. بعد ذلك تم إضافة مسحوق Sr(OH)2 إلى محلول CNTs النانوي بنسبة محسوبة للحصول على خليط متجانس من CNTs-Sr(OH)2. Sr(OH)2الناتج يمتص ثنائي اوكسيد الكاربون من الهواء ليكون كاربونات لسترونتيوم لذلك، فان المحلول الجديد الناتج هو CNTs-SrCo3. و لتجفيف المحلول وضعت ثلاث قطرات من المحلول الجديد على شرائح زجاجية. ولاستنتاج ضرر الاشعاع على سطح CNTs، شععت العينات بواسطة النظير المشع (90Sr/90Y) الباعث لجسيمات بيتا لفترات زمنية مختلفة. قيست خصائص السطح باستخدام حيود الاشعة السينية XRD بينما تم قياس خاصية الشكل والحجم عن طريق المجهر الإلكتروني الماسح SEM. اظهرت النتائج توزيع متجانس للجسيمات النانوية مع متوسط حجم للجسيمات حوالي 20nm. بينت اطياف XRD لجميع العينات قبل وبعد التشعيع ب β وجود قمم عالية تقريبا عند2θ =25 درجة وعند مقارنة طور مع XRD مع البطاقة القياسية فان المادة النانوية الناتجة هي كاربونات السترونتيوم .(SrCo3) اظهرت الصورالمجهرية SEM، تزيين SrCOo3 سطح أنابيب الكاربون النانوية CNTs بشكل جديد ولم يكن هناك أي اختلاف ملحوظ في المقابل بسبب التعرض لإشعاع بيتا.} }