TY - JOUR ID - TI - ELECTROCHEMICAL PREPARATION OF A MOLECULAR IMPRINTED POLYMER ELECTRODE FOR ESTEMATION OF ASPIRIN USING TWO DIFFERENT FUNCTIONAL MONOMERS. التحضير الكهروكيميائي لقطب بوليمر مطبوع جزيئيا لتقدير الاسبرين وباستخدام وحدتين وظيفيتين مختلفتين AU - Yehya Kamal Al-Bayati2 .يحيى كمال البياتي2 AU - Aseel Salah Mansoor1 اسيل صلاح منصور1 PY - 2021 VL - 13 IS - 1 SP - 14 EP - 25 JO - iraq journal of market research and consumer protection المجلة العراقية لبحوث السوق وحماية المستهلك SN - 20713894 25236180 AB - For aspirin estimated, a molecularly imprinted polymer MIP-ASP electrodes were generated by electro-polymerization process, the electrodes were prepared by combining the template (aspirin) with (vinyl acetate (VA), 1-vinylimidizole (VIZ) as a functional monomer and N, N-methylene bisacrylamide (MBAA) as crosslinkers using benzoyl peroxide (BPO) as an initiator. The efficiency of the membrane electrodes was analyzed by differential pulse voltammetry (DPV). Four electrodes were synthesized using two different plasticizers, di-butyl sebacate (DBS), di-octyl phthalate (DOP) in PVC matrix. Scanning electron microscopy (SEM) was used to describe the generated MIP, studying the electrodes properties, the slope, detection limit, and life time and linearity range. The effect of PH and interferes on the efficiency of the MIP electrode was investigated. The study has shown that the molecularly imprinted electrodes have high sensitivity and responsiveness to aspirin. The DPV value was linearly dependence on the aspirin concentration and a linear curve was obtained within the range of (1×10−1-5×10-4) M of aspirin with correlation coefficients are about (0.9974, 0.9966, 0.9938 and 0.9961) with slops value of (-21.41, -17.67, -17.47 and -18.67) and the detection limit for all electrodes ranging from (7.5×10-5-1×10-4) M. The molecularly imprinted electrode exhibited a good response with highly reproducible and no effect on interferes frequently available in pharmaceutical formulations. The approach employed is easy and fast. Also ASP membranes get a limited time of response, excellent mechanical stability, removable and are easy to construct.

لتقدير الأسبرين، تم إنشاء أقطاب بوليمرية مطبوعة جزيئيا MIP-ASP عن طريق Electro-polymarization ، تم تحضير الأقطاب الكهربائية عن طريق الجمع بين القالب (الأسبرين) مع (الفينيلأسيتات (VA)، 1-فينيل ايميدزول (VIZ)) كمونومروظيفي و N و N- ميثيلين بيساكريلاميد (MBAA) كموصلات متشابكة وباستخدام البنزويل بيروكسايد (BPO) كبادئ، تم تحليل كفاءة الأقطاب الكهربائية الغشائية بواسطة قياس الجهد التفاضلي (DPV)، تم تصنيع أربعة أقطاب كهربائية باستخدام ملدنين مختلفين وهما ثنائي- بوتيلسيبيكيت (DBS)، وثنائي أوكتيلفثاليت (DOP) في مصفوفة PVC، وتم استخدام الفحص المجهري الإلكتروني (SEM) لوصف MIP المتولد، ودراسة خصائص الأقطاب الكهربائية، والميل، وحد الكشف، وعمر القطب، والمدى الخطي. تم فحص تأثيردرجة الحموضة وتأثير التداخلات على كفاءة القطب MIP. وقد أظهرت الدراسة أن الأقطاب التي تم طبعها جزيئيًا لها حساسية عالية واستجابة للأسبرين. وكانت قيم الـ DPV هي خطية اعتماد على تركيز الأسبرين وتم الحصول على منحنى خطي ضمن حدود (1×10−1-5×10-4) Mمولاري من الأسبرين مع معاملات الارتباط حوالي (0.9974 ، 0.9966 ، 0.9938 و 0.9961) بقيمة انحدار تبلغ (-21.41 ، -17.67 ، -17.47 و -18.67) وحد الكشف لجميع الأقطاب الكهربائية يتراوح من (7.5×10-5-1×10-4) مولاري. وقد أظهرت الاقطاب المطبوعة جزيئيًا استجابة جيدة مع قابلية عالية للتكرار وليس هناك تأثيرللتداخلات المتوفرة بشكل متكرر في المستحضرات الصيدلانية. ان النهج المستخدم سهل وسريع. كما حصلت أغشية ASP على وقت استجابة محدود، واستقرار ميكانيكي ممتاز، وقابلة للإزالة وسهلة التركيب. ER -