TY - JOUR ID - TI - Improvement of Gypsum Behaviour Using Glass Wool AU - Adnan Flayih Hassan Al-Sibahy PY - 2016 VL - 24 IS - 4 SP - 1124 EP - 1135 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This paper presents an experimental investigation to assess the behaviour of gypsum plasters containing glass wool. Two types of locally available gypsum powder Gypsum-1 and Gypsum-2 were used in this study. The addition of glass wool was done as a partial replacement by volume at five different ratios 5%, 10%, 15, 20% and 25%. A comprehensive experimental programme was designed to measure both mechanical and thermal characteristics using 122 samples with different size configuration. These include tests for setting time, compressive and flexural strengths, density at ambient and high temperatures, thermal conductivity and thermal resistance. In order to explore actual behaviour, the test results have been compared with relevant BS EN and Iraqi Standards. The results obtained showed that both compressive and flexural strengths have consistent behaviour for all of the tested samples. The highest values of compressive and flexural strengths were 4.17 MPa and 2.11 MPa for modified gypsum mixtures of Gypsum-2 containing 20% and 25% glass wool respectively. The added amount of glass wool in addition to its distribution within the samples are the most critical parameters governing overall mechanical behaviour. The control gypsum mixtures of both Gypsum-1 and Gypsum-2 exhibited cracks at high temperatures, whereas modified mixtures seem to be durable at these conditions. Some improvements have been obtained in terms of thermal conductivity and thermal resistance for the modified gypsum mixtures.

يعرض هذا البحث دراسة عملية لتقييم تصرف خلطة الجبس الحاوية على الصوف الزجاجي. تم استخدام نوعين من الجبس المتوفر محلياً. عملية اضافة الصوف الزجاجي كانت بشكل بدليل جزئي كنسب حجمية من الجص مقدارها 5% ،10 % ، 15 % ، 20 % و 25 % . تم تصميم برنامج عملي واسع لقياس الخصائص الميكانيكية والحرارية باستخدام 122 نموذج وبمختلف الاحجام.أظهرت النتائج المستحصلة لفحوصات مقاومة الانضغاط والكسر تصرف متوافق لكل العينات المفحوصة. حيث كانت أعلى قيمة لمقاومةالانضغاط والكسر 4.17ميكاباسكال و 2.11ميكاباسكال لخلطة الجبس الثانية الحاوية على صوف زجاجي مقداره 20 % و 25 % على التوالي. العوامل الرئيسية التي تتحكم بالتصرف الميكانيكي هي كمية الصوف المُضاف وطريقة توزيعة داخل الخلطة. أظهرت الخلطات المرجعية ( الغير حاوية على الصوف الزجاجي) ولكلا النموذجين العديد من التشققات في في درجات الحرارة العالية، بينما كانت الخلطات المطوّرة (الحاوية على الصوف الزجاجي) ذات ديمومة عالية في هذه الظروف. تم الحصول على بعض التحسينات في خصائص التوصيل الحراري والمقاومة الحرارية لخلطات الجبس المطوّرة. ER -