TY - JOUR ID - TI - EFFECT OF ALUMINUM CONTENT ON THE HARDNESS AND MACHINABILITY OF BRASS ALLOY USED IN OXYGEN CYLINDER VALVE تاثير نسبة الالمنيوم على الصلاده وقابلية التشغيل لسبيكة البراص المستخدمة في صمام اسطوانة الاوكسجين AU - Hassanein Ibraheem Khalaf حسنين ابراهيم خلف PY - 2021 VL - 21 IS - 3 SP - 213 EP - 220 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - There is high consumption of oxygen cylinder valves due to incorrect application of valves, therefore, this research will study the possibility to modify Brass alloy that used to produce cylinder valves and reduce their erosion that happens under the use of valve. The main type of brass that used to make cylinder valve is CW713R which contained aluminum with percentage of 1.3-2.3% with hardness of 174 HV. Therefore, the effect of aluminum element on the properties of brass alloy will study to find the best and the optimum percentages that can be added to improve the hardness and machinability of cylinder valve. Brass scrap was melted using oil fire furnace and aluminum element was added before it cast. Then, the melting liquid was poured on steel die casting mold. The result shows that the hardness Brass cylinder valve was increased by increasing the percentage of aluminum element. It is raised from 206 to 605 HV. But when the percentage of aluminum reached 10 % the Brass material becomes brittle and difficult to machine. The best percentage of aluminum that can be added to brass alloy lies in the range of 2.5 – 5%.

بسبب عدم الاستخدام الصحيح للصمامات لوحظ هناك استهلاك كبير في صمامات قناني الاوكسجين.لذلك هذا البحثسوف يدرس امكانية تحسين سبيكة البراص المستخدمه لتصنيع صمامات الاوكسحين وتقليل التاكل الفيزيائي الناتح منعملية استخدام الصمامات. من اهم انواع البرلص المستخدمه في صناعية الصمام هي CW713R التي تحتوي علىنسبة المنيوم تتراوح مابين ١،٣ الي ٢،٣ ٪ وصلاده HV174 لذلك تاثير عنصر الالمنيوم على خواص سبيكة البراصسوف تدرس لابجاد افضل النسب التي يمكن اضافتها لتحسين صلاده وقابلية التشغيل لصمام الاسطوانه. يتم صهرسكراب البراص في افران تعمل بالنفط مع اضافك الالمتيوم قبل عملية الصب في القوالب الحديديه. اوضحت النتائح بانصلادة صمام الاسطوانه يزداد بزيادة نسبة الالمنيوم من 206 الي HV605 ولكن عند وصول نسبة الالمنيوم إلى ١٠ ٪تتحول سبيكة البراص إلى ماده هشه تصعب عملية تشغيلها. لذلك افضل نسبة اضافة للالمنيوم تتراوح مابين ٢،٥ إلى. ٪٥ . ER -