TY - JOUR ID - TI - "Optimization of Radio Frequency Sputtering of Graphite on Nitinol " AU - Zaineb Fadhil Kadhim AU - Ekbal Mohammed Saeed AU - Haider A.H. Al-Jubouri PY - 2021 VL - 29 IS - (2)Eng. SP - 51 EP - 70 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - The unique performance offerings of Ni-Ti alloys which involve the shape memory effect, super elasticity and biocompatibility have led to widespread acceptance of these alloys as valuable engineering materials. Deposition thin film from graphite target on nitinol by using radio frequency sputtering as physical vapor deposition method . Determination the improvement in hardness, wear rate, roughness, corrosion rate and cell viability before and after deposition. Three values of radio frequency sputtering as (200W, 400W, 600W) are used. The deposited film is considered as diamond like carbon DLC depending on peaks of Raman spectroscopy. DLC had good characteristics as antibacterial property, low friction coefficient, high wear resistance and good corrosion resistance. High power led to high Vickers hardness as 657 with low specific wear rate as 7.34*10-8g/cm. High corrosion resistance achieved after 400W as 0.001mm/y and high cell viability as 93.11%. The optimized results from genetic algorithm with fuzzy inference system pointed as power 222W, Vickers hardness as 666,corrosion current density 0.138,and cell viability as 88.8.

الاداء العالي الذي تظهره سبيكة النيكل-تيتانيوم لكونها سبيكة ذاكرة للشكل وامتلاكها لخاصية المرونة الفائقة والتوافية الحياتية ادى الى انتشار واسع لهذه السبيكة كمادة هندسية. تم ترسيب طبقة رقيقة على سبيكة نيكل-تيتانيوم باستخدام هدف من الكرافيت وعن طريق استخدام التشتيت بالاشعة الراديوية باعتبارها احدى طرق الترسيب الفيزيائي للبخار. قياس التحسن في الصلادة ومعدل البلى والخشونة ومعدل التاكل ومعدل التواجد الحيوي للخلايا قبل وبعد الترسيب. ثلاث قيم للطاقة تم استخدامها وهي (200واط ,400واط ,600واط). اعتبرت الطبقة المترسبة عبارة عن الماس المشابه للكاربون بالاعتماد على القيم الناتجة من مطياف رامان. يتميز الماس المشابه للكاربون بكونه مضاد للبكتيريا ويمتلك مقاومة عالية للتاكل ومقاومة جيدة للبلى ومعامل احتكاك منخفض وصلادة عالية. اعلى صلادة تم الحصول عليها عند استخدام طاقة الترسيب 600واط ومقدارها 657 مع معدل بلى منخفض ومقداره 7,34*10-8 غم/سم. اعلى مقاومة للتاكل تم الحصول عليها بعد استخدام 400واط وكانت 0,001ملم/سنة واعلى مقدار من الخلايا الحية وهو 93,11%. النتائج الامثل من خلال الخوارزمية الجينية مع نظام الاستدلال المضبب ب مقدار222واط مع صلادة فيكرز بمقدار 666 وكثافة تيار التاكل 0,138 ومقدار الخلايا الحية 88,8. ER -