TY - JOUR ID - TI - Extraction of Phenol From Industrial Water Using Different Solvents استخلاص الفينول من المياه الصناعية باستخدام مذيبات مختلفة AU - Bushra Yaseen بشرى ياسين AU - Khalid Farhod Al-Jiboury خالد فرهود AU - Mahmoud Omar Abdullah محمود عمر PY - 2008 VL - 4 IS - 4 SP - 9 EP - 25 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - The analysis and efficiency of phenol extraction from the industrial water using different solvents, were investigated. To our knowledge, the experimental information available in the literature for liquid-liquid equilibria of ternary mixtures containing the pair phenol-water is limited. Therefore the purpose of the present investigation is to generate the data for the water-phenol with different solvents to aid the correlation of liquid-liquid equilibria, including phase diagrams, distribution coefficients of phenol, tie-lines data and selectivity of the solvents for the aqueous phenol system.
The ternary equilibrium diagrams and tie-lines data for systems containing Water-Phenol-Benzene, Water-Phenol-Chloroform, Water-Phenol-iso-Butyl Acetate, Water-Phenol-Butanol, Water-Phenol-Ethyl Methyl Keton and Water-Phenol-Toluene, were determined at 303 K and atmospheric pressure.
The capacity and selectivity of these organic solvents in each of these systems were determined from the tie-lines data. The capacity of the isobutyle acetate was found to be the highest among the other solvents, and its selectivity was also the highest. Similar results also were obtained for the ethyl methyl keton but gave less capacity and selectivity as compared to the isobutyle acetate. It can be concluded that both isobutyle acetate and ethyl methyl keton are good solvents for extraction of phenol from industrial water.
The liquid-liquid equilibrium data of ternary systems were correlated to the NRTL, UNIQUAC and UNIFAC models of activity coefficient to determine their adjustable parameters. The standard deviations from experimental compositions were calculated. Results show that the correlation may be greatly improved by applying the NRTL model with the regression criteria based on minimizing the experimental and calculating distribution coefficients SK to give an average value of the root mean square deviation about 1.436 % and in terms of the average errors in the distribution ratio for all tie-lines about 10.776 %.

تم تحليل و دراسة كفاءة استخلاص الفينول من المياه الصناعية باستخدام مذيبات مختلفة. بحسب المعلومات العملية المحدودة المتوفرة في النشرات والمجلات العلمية لتوازن سائل – سائل للأنظمة الثلاثية والتي تحوي على الثنائي الماء و الفينول ،فان الهدف من هذه الدراسة هو معرفة بيانات التوازن للأطوار لغرض إيجاد علاقات توازن السائل – السائل لأنظمة الماء و الفينول مع المذيبات المختلفة بضمنها مخطط الأطوار ، معامل التوزيع للفينول وبيانات خطوط التوازن وانتقائية افضل مذيب للفينول.تم إيجاد بيانات مخططات التوازن للأنظمة الثلاثية التالية : ماء-فينول-بنزين ، ماء-فينول-كلوروفورم ، ماء-فينول-ايزوبيوتايل اسيتيت ، ماء-فينول-بيوتانول ، ماء-فينول-اثيل مثيل كيتون و ماء-فينول-تلوين عند درجة حرارة 303 كلفن وضغط جوي واحد .تم حساب سعة وانتقائية كل من هذه المذيبات العضوية لكل من الأنظمة المذكورة أعلاه من بيانات توازن الأطوار . لقد وجد ان سعة الأيزوبيوتايل اسيتيت هي الأعلى مقارنة مع المذيبات الأخرى. كما إن انتقائية المذيب اعلاه هي الأعلى ، بينما كانت سعة و انتقائية مذيب الاثيل مثيل كيتون اقل من المذيب أعلاه والأعلى مقارنة مع المذيبات الأخرى . يمكن القول ان كل من مذيب الأيزوبيوتايل اسيتيت و مذيب الاثيل مثيل كيتون من المذيبات الانتقائية الجيدة ويمكن استخدامهم في استخلاص مادة الفينول من المياه الصناعية .تم تطبيق النتائج العملية للأنظمة الثلاثية على معادلات NRTL, UNIQUAC and UNIFAC لمعامل الفعالية ، وذلك لمعرفة المعاملات الثنائية لتلك المعادلات . تم حساب التراكيز المتوقعة حسب تلك المعادلات و مقارنتها مع النتائج العملية ووجد ان معادلة NRTL مع الدوال الرياضية لتقليل نتائج الفرق بين القيم النظرية و العملية لمعامل التوزيع يعطي افضل النتائج حيث إن معدل الخطأ في مخطط قابلية الإذابة بحدود 1.436 % ومعدل الخطأ في نسبة التوزيع بحدود 10.776 % . ER -