TY - JOUR ID - TI - A State-of-the-Art Review of the Behavior of SIFCON As a Structural Member مراجعة حديثة لسلوك السيفكون كعضو هيكلي AU - Haneen Adulkadim Hamed حنين عبد الكاظم حامد AU - Zinah Waleed Abass زينة وليد عباس PY - 2021 VL - IS - 35 SP - 1 EP - 18 JO - AL-MANSOUR JOURNAL مجلة المنصور SN - 18196489 AB - Abstract: The "Slurry Infiltrated Fiber Concrete (SIFCON)" composites can be considered as a new trend in civil engineering fields that have a motivate impact. Such composites are usually synthesized by infiltrating cement slurry with steel fibers matrix to get high level of mechanical properties. Portland cement concrete is weak in tensile and might not illustrate large tensile strains margins. Materials such as steel and pre-stressed tendons were historically used to avoid these limitations of cement. The last fifteen years. Interest has increased among using discontinuous, separated steel fibers for alternate or supplementary reinforcement. Fibers for this utilization have diameters that takes levels between 0.01 to 0.35 in. (0.25 to 0.9 mm) and lengths ranging from 0.5to 3.0 in. (12.7 to 76.2 mm). However, the principal functions of steel fibers are to enhance resistance to impact. By the means of posy cracking ductility, the cracking and mode of failure can be controlled. To increase the performance with respect to tensile strength, flexural strength as well as the fatigue strength.

يمكن اعتبار مركبات "خرسانة الألياف المتسربة الطينية (السيفكون)" بمثابة اتجاه جديد في مجالات الهندسة المدنية التي لها تأثير محفز. عادة ما يتم تصنيع هذه المركبات عن طريق تسلل ملاط الأسمنت مع مصفوفة ألياف الصلب للحصول على مستوى عالٍ من الخواص الميكانيكية. خرسانة الأسمنت البورتلاندي ضعيفة الشد وقد لا توضح هوامش شد كبيرة. تم استخدام مواد مثل الفولاذ والأوتار سابقة الإجهاد تاريخياً لتجنب هذه القيود المفروضة على الأسمنت. الخمسة عشر عاما الماضية. زاد الاهتمام بين استخدام ألياف فولاذية متقطعة ومنفصلة للتعزيز البديل أو التكميلي. الألياف لهذا الاستخدام لها أقطار تتراوح بين 0.01 إلى 0.35 بوصة (0.25 إلى 0.9 ملم) وأطوال تتراوح من 0.5 إلى 3.0 بوصة (12.7 إلى 76.2 ملم). ومع ذلك ، فإن الوظائف الرئيسية للألياف الفولاذية هي تعزيز مقاومة الصدمات. عن طريق ليونة التكسير الإيجابي ، يمكن التحكم في التكسير ونمط الفشل. لزيادة الأداء فيما يتعلق بقوة الشد وكذلك قوة الانحناء. ER -