@Article{, title={Study on Reactive Blue Adsorption on Raw and Modified Wheat Straw Using Fixed-Bed Column دراسة امتزاز الصبغة الزرقاء الفعالة على قش الحنطة الطبيعية والمعدلة باستخدام عمود الحشوة الثابتة}, author={Khalid M. Mousa Al-zobai خالد مخلف موسى and Alaa H. Taha علاء حسين طه}, journal={Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية}, volume={24}, number={1}, pages={1-7}, year={2021}, abstract={The intention of this study is to explore the efficiency and feasibility of adsorption of Reactive Blue dye (H3R) used in textile industries using Raw wheat straw (RWS) and Modified wheat straw (MWS) as a low-cost adsorbent. Wheat straw was modified using cationic surfactant (CTAB) to study the improvement of dye removal. The properties of Raw and Modified wheat straw are studied by means of Fourier transform infrared (FTIR) and scanning electron microscope (SEM) analysis to determine the functional groups and the nature of their surface. Continuous experiments were conducted by fixed-bed column to study the characteristics of the breakthrough curve using different bed heights and flow rates. Results showed that the breakthrough time increases with the increase of bed height and flow rate, which in turn result in higher removal capacity. Results also showed that a higher flow rate leads to a lower adsorption capacity due to insufficient residence time. Bed depth service time model (BDST), Adam-Bohart and Thomas models were used to predict the breakthrough curves and to determine the adsorption capacity of the column. The highest bed capacity of 12.95 and 32.2 mg/g for MWS were obtained using 10 mg/L, 10 cm bed height at 10 mL/min and 30 mL/min respectively.

الهدف من هذه الدراسة هو استكشاف فعالية وجدوى امتزاز الصبغة الزرقاء الفعالة (H3R) المستخدمة في صناعات النسيج باستخدام قش الحنطة الطبيعية (RWS) وقش الحنطة المعدلة (MWS) كمادة مازًة واطئة الكلفة. تم تعديل قش الحنطة باستخدام احدى مواد الشد السطحي (CTBA) لدراسة مدى تحسن ازالة الصبغة. خواص كل من قش الحنطة الطبيعية و المعدلة تمت دراستها بواسطة تحويل فورييه للطيف بالاشعة تحت الحمراء (FTIR) وتحليل المجهر الالكتروني الماسح (SEM) لمعرفة المجاميع الفعالة وطبيعة سطح المادة المازًة. تم عمل التجارب المستمرة باستخدام عمود الحشوة الثابتة لدراسة خواص المنحني باستخدام حشوات بارتفاعات مختلفة وكذلك باستخدام معدلات جريان مختلفة. اظهرت النتائج ان منحني الزمن يزداد بازدياد ارتفاع الحشوة وبتقليل معدل الجريان ويؤدي بالتالي الى سعة ازالة اعلى. كذلك اظهرت النتائج ان معدلات الجريان العالية تؤدي الى اقل سعة امتزاز نتيجة زمن البقاء غير الكافي. تم استخدام ثلاثة موديلات (BDST)، Adam-Bohart و موديل Thomas لتحديد منحني الزمن ولحساب سعة الامتزاز لعمود الامتزاز. تم الحصول على اعلى سعة امتزاز لحشوة للحنطة المعدلة هي 12.95 مغم/غم باستخدام معدل جريان 10 مل/دقيقة و ارتفاع 10 سم، و 32.2 مغم/غم باستخدام معدل جريان 30 مل/دقيقة و ارتفاع 10 سم.} }