TY - JOUR ID - TI - Effect of Super Plasticizer on the Properties of Pre-cast Concrete Flags Reinforced by Steel Fibers and Including Slag تأثير الملدن على خواص البلاطات الخرسانية المسلحة بالالياف الحديدية والحاوية على الخبث AU - بسام عبد الجبار محمد AU - . قيس جواد فريح * PY - 2007 VL - 25 IS - 10 SP - 337 EP - 352 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This research has studied the possibility of optimizing some of the properties of the precast concrete flags by using by-products of steel fragments from the CNC machines and local slag, the combined influence of these materials with the water reducing agent. The local slag is produced by the blast furnace from the scrap as a raw material, which is called (steel slag). The local slag has a low activity as a cementicious material due to low content of glass since it has not been treated, and contains high ferrous ratio. The study includes the results of compressive and strength as well as transverse loading tests. Also, it includes the measurements of absorption on different curing durations of the reference concrete samples and concrete contains the metal and chemical additives, reinforced by steel fibers. This study has taken place by replacing the slag instead of fine aggregate, using ratios of (0, 10, 20, 30%) by weight of sand with the influence of steel fibers from the CNC by-products, using ratios of (0.5, 1.0, 1.5 %) by volume of the concrete mix with the influence of super plasticizer of (1.5%) ratio by weight of cement. The results had shown that the concrete compressive strength had increased with using (30%) of slag and (1%) of steel fibers of the CNC machine by- product, with (1.5%) of the super plasticizer, compared with the reference mixes. The results had shown also, that the concrete containing super plasticizer with slag (20%) and (1.0%) of the steel fibers had shown better flexural strength compared with the reference mixes at ages (7, 28 days). The results had also shown increasing in the transverse loading test of the pre cast concrete flags, especially when using slag of (30%) and steel fibers of (1%) and super plasticizer, compared with the reference mixes at ages (7, 28 days). The results had shown clear reduction of the absorption at slag ratio (30%) and (1.0%) of steel fibers with the super plasticizer, compared with the reference mixes at age (28 days).

تضمن هذا البحث دراسة إمكانية تحسين بعض خواص البلاطات الخرسانية المسبقة الصب (Precast Concrete Flags) بإضافة ألياف مخلفات خراطة المعادن الفولاذية الناتجة عن خراطة القطع الفولاذية من المعامل الإنتاجية والخبث المحلي العراقي، والتأثير المشترك لهما مع المضاف المقلل للماء بدرجة متفوقة، والجدير بالذكر أن الخبث المحلي ينتج بواسطة الفرن القوسي الكهربائي اعتمادﴽ على مخلفات القديم كمادة أولية لاستخلاص الحديد وإنتاج الخبث، والذي يعرف بخبث الصلب، إن فعالية الخبث المحلي واطئة كمادة سمنتية بسبب إنخفاض محتوى الزجاج فيه نتيجة عدم معالجته، وكذلك بسبب إحتواءه على نسبة عالية من الحديد، أجريت فحوص مقاومة الإنضغاط والإنثناء وفحص التحميل المستعرض وفحص الإمتصاص الكلي، خلال فترات مختلفة من الإماهة للخرسانة المرجعية والخرسانة الحاوية على المضافات المعدنية و الكيميائية والمسلحة بنسب مختلفة من الألياف الفولاذية. تمت دراسة تأثير إحلال الخبث بديلا عن الركام الناعم بنسب (صفر،10،20،30٪) وزنا من الرمل،مع إضافة ألياف مخلفات المعادن الفولاذية بنسب (0.5،1.0،1.5٪) حجما من الخلطة الخرسانية، إلى نسب الخبث السابقة الذكرمع إضافة الملدن المتفوق بنسبة ثابتة (1.5٪) من وزن السمنت إلى جميع النسب السابقة. أظهرت النتائج أن الخرسانة تبدي زيادة في مقاومة الإنضغاط عند نسبة إحلال خبث (30٪) مع نسبة (1.0٪) ألياف مخلفات المعادن الفولاذية مع الملدن المتفوق بنسبة (1.5٪) مقارنة بالخلطة المرجعية، وبينت النتائج أيضا أن الخرسانة الحاوية على الملدن المتفوق مع نسبة إحلال خبث (20٪) مع نسبة (1.0٪) ألياف مخلفات المعادن الفولاذية تبدى تحسنا كبيرا في مقاومة الإنثناء مقارنة مع الخلطة المرجعية بعمر (28.7يوم)، وأظهرت النتائج بصورة عامة تحسنا فى قوة التحمل المستعرض للبلاطات الخرسانية، خاصة عند نسبة إحلال خبث (30٪) مع نسبة (1.0٪) ألياف مخلفات المعادن الفولاذية مع الملدن المتفوق، مقارنة مع الخلطة المرجعية بعمر (28.7يوم)، كما بينت النتائج إنخفاضا كبيرا في الإمتصاص عند نسب إحلال الخبث (30٪) مع نسبة (1.0٪) ألياف مخلفات المعادن الفولاذية مع الملدن المتفوق، مقارنة مع الخلطة المرجعية بعمر (28يوم). ER -