@Article{, title={Influence of Draft Tube Diameter on Operation Behaviorof Air Lift Loop Reactors تأثير قطر الأنبوب الداخلي على سلوك تشغيل مفاعلات تدوير الهواء}, author={Laith S. S. Al-Kuffe ليث سالم صبري الكوفي and Ali Abdul-Rahman Al-Azzi علي عبد الرحمن نصيف}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={6}, number={2}, pages={21-32}, year={2010}, abstract={The ratio of draft tube to reactor diameters is of decisive importance for the operation behavior of air lift loop reactors. The influence of draft tube geometry was investigated with respect to oxygen mass transfer and mixing time. The diameter ratio was varied between 0.33 and 0.80. The measurements were performed in two loop reactors with liquid capacities of 11.775 and 26.49 liters using aqueous with solutions of different coalescence behavior. The results show that there is no single diameter ratio which would produce most favorable conditions for the two process parameters. With respect to the more important requirements of aerobic cultures, i.e high oxygen mass transfer and efficient mixing, a diameter ratio between 0.5 and 0.6 is recommended. If high liquid velocities in the draft tube are required a ratio of 0.6 should be used.

ان النسبة بين القطر الداخلي الى القطر الخارجي ﺬو اهمية كبيرة جدا في السلوك التشغيلي الديناميكي لمفاعل التدوير الهوائي. ان تاثير الابعاد الهندسية للعمود الداخلي (draft) قد تم دراسته نسبة الى العوامل التشغيلية والتصميمية التالية: انتقال الكتلة للاوكسجين, زمن الخلط وبنسبة قطرية (DD/D) تتراوح بين 0.45 الى 0.59 حجم السائل المستخدم فى المفاعلين هو 11.775 الى 26.49 لترتم استخدام محاليل ذات قابلية مختلفة لتجميع الفقاعات. اظهرت النتائج انه لاتوجد نسبة قطرية محدودة ثابتة هي المفضلة. لجميع العوامل التصميمية بقدر ماتوجد نسبة معينة هي المفضلة لعامل واحد او عاملين دون العوامل الاخرى فمثلا اظهرت النتائج ان النسبة القطرية بين 0.5 الى 0.6 هي الاكثر ملائمة لعاملي انتقال الكتلة وزمن الخلط اما فى حالة الحصول على سرعة عالية للسائل في الانبوب الداخلي (draft) فكانت النسبة القطرية (0.6) هي الامثل.} }