@Article{, title={Laser Micro and Nano Drilling of Aluminium Alloy Using Tungsten Carbide and Silica Carbide Nanoparticles التثقيب المايكروي و النانوي بالليزر لسبيكة الألومنيوم باستخدام الدقائق النانوية من كربيد التنجستن و كربيد السيليكا}, author={Nibras H. Abed نبراس حامد عبد and Mahmoad SH. Mahmoad محمود شاكر محمود}, journal={Iraqi Journal of Laser المجلة العراقية لليزر}, volume={20}, number={2}, pages={42-48}, year={2021}, abstract={The micro and nano drilling holes are produced by a Q-switched Nd :YAG laser (1064 nm) interaction with 8009 Al alloy using two kinds of nanoparticles. Nanoparticles are tungsten carbide (WC) and silica carbide (SiC). The micro and nano holes have been investigated with different laser pulse energies (600, 700 and 800)mJ, different repetition rates (5Hz and 10Hz) and different concentrations of nanoparticles (90%, 50% and 5% ). The results indicate that micro and nano holes have been achieved under conditions of 600 mJ laser pulse energy, 5Hz laser repetition rate, and 5% concentration of the nanoparticles (for the two types of nanoparticles). The diameters of holes are increase to millimetres and cracks are formed with increasing of the laser pulse energy, laser repetition rate and high concentration of nanofluid.

تم إنتاج الثقوب المايكروية و النانوية بواسطة ليزر Q-switched Nd: YAG (1064 نانومتر) مع سبيكة 8009 Al باستخدام الدقائق النانوية. تم استخدام نوعين من الدقائق النانوية مع هذه السبيكة و هي كربيد التنجستن (WC) وكربيد السيليكا (SiC). في هذا العمل، تم عمل الثقوب المايكروية و النانوية بواسطة نبضات ليزرية بطاقات مختلفة (600 ، 700 و 800) مللي جول، ومعدلات تكرار مختلفة (5 هرتز و 10 هرتز) وتراكيز مختلفة من الدقائق النانوية (90٪، 50٪ و 5٪). تشير النتائج إلى أن الثقوب المايكروية و النانوية قد تحققت عندما تكون طاقة نبضة الليزر 600 مللي جول ، ومعدل تكرار نبض الليزر 5 هرتز، وتراكيز الدقائق النانوية (لنوعي الدقائق النانوية) 5٪. تزداد أقطار الثقوب إلى ملليمترات وتتشكل الشقوق مع زيادة طاقة نبضة الليزر ، ومعدل تكرار نبض الليزر باستخدام تركيز عالٍ من الموائع النانوية.} }