TY - JOUR ID - TI - Effect of Adding Alcohols and Gas Velocity on Gas Holdup and Mass Transfer Coefficient in Bubble Columns withDraught Tube تأثير اضافة الكحولات وسرعة الغاز على زمن احتجاز الغاز ومعاملانتقال الكتلة في العمود الفقاعي ذو الانبوب الداخلي AU - Ali Abdul-Rahman N. Jasim علي عبد الرحمن نجم PY - 2009 VL - 5 IS - 2 SP - 10 EP - 19 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - The bubble columns are widely used as a two or three phase reactor in industrial chemical process such as absorption, biochemical reactions, coal liquefaction, etc. To design such a column, two main parameters should be taken in consideration, the gas hold-up ( ), and the liquid phase mass transfer coefficient KLa. The study includes the effect of gas velocity and the addition of alcohols on gas hold-up and mass transfer coefficient in bubble column with draught tube when the length of the column is 1.5m and the ratio of the draught tube diameter to the column diameter equals 0.5 and the air dispersion into the base of the draught tube using a multi hole tuyere is equivalent to a diameter of 0.15 mm and has a free sectional distributor area of 61%.
Water and three aqueous solutions of 10% concentration methanol, ethanol and isopropanol, were used as the liquid phase. The various gas velocity (0.01-0.1) meter/sec are used and the results were compared in case of using water only without the addition of alcohols. From experimental observations, and KLa increase with increasing gas velocity and with the coalescence inhibition of liquid.

لقد شاع أسنخدام الاعمدة الفقاعية كمفاعلات ثنائية او ثلاثية الطور في أغلب العمليات الكيميائية الصناعية مثال على ذلك عمليات الامتصاص والتفاعلات البايوكيميائية واسالة الفحم وغيرها. في مثل هذه الاعمدة يحب الاخذ بنظر الاعتبار عاملين مهمين هما نسبة احتجاز الغاز ( ) ومعامل أنتقال الكتلة (KLa). يتضمن البحث دراسة تأثير أضافة الكحولات وتغير سرعة الغاز على نسبة احتجاز الغاز ( ) ومعامل انتقال الكتلة (KLa) باستخدام عمود فقاعي (Bubble Column) من نوع (Draught Tube) بطول 1.5 متر ونسبة قطر 0.5 (العمود الداخلي (Draught) الى قطر العمود الخارجي).استعمل موزع الغاز من نوع (Multi Hole Tuyere) بقطر مكافئ مقداره 0.15 ملم وبمساحة جريان متاحة 61% تم استعمال ثلاثة محاليل للكحولات بتركيز 01% (الميثانول – الايثانول – الايزوبروبانول) حيث استخدمت سرع متعددة للغاز (0.01-0.1) متر/ ثانية وتمت مقارنة النتائج في حالة استخدام الماء فقط دون أضافة الكحولات . اظهرت التجارب العملية انه بزيادة سرعة الهواء والقدرة على منع تجمع الفقاعات يؤدي الى زيادة نسبة احتجاز الغاز ( ) ومعامل انتقال الكتلة (KLa). ER -