@Article{, title={Parametric Study of a Two-Phase Closed Thermosyphon Loop دراسة استدلالية لمنظومة سيفون حراري ثنائي الطور}, author={Akram Amer Thieb كرم عامر ذياب and Wail Sami Sarsam وائل سامي سرسم}, journal={Journal of Engineering مجلة الهندسة}, volume={28}, number={5}, pages={92-118}, year={2022}, abstract={A theoretical and experimental investigation was carried out to study the behavior of a two-phase closed thermosyphon loop (TPCTL) during steady-state operation using different working fluids. Three working fluids were investigated, i.e., distilled water, methanol, and ethanol. The TPCTL was constructed from an evaporator, condenser, and two pipelines (riser and downcomer). The driving force is the difference in pressure between the evaporator and condenser sections and the fluid returns to the heating section by gravity. In this study, the significant parameters used in the experiments were filling ratios (FR%) of 50%, 75%, and 100% and heat-input range at the evaporator section of 215-860.2 W. When the loop reached to the steady-state, the wall-temperature was recorded at various positions along the thermosyphon loop. Results showed that the thermal performance with water was better than methanol and ethanol with same condition. The experimental values of the heat transfer coefficient at the evaporator section were measured for the three working fluids. The results were estimated with the nucleate boiling correlation using engineering equation solver (ESS) program. In addition, a comparison between the experimental (h_(e,exp.)) and theoretical (h_(e,theo.)) values of heat transfer coefficient in the evaporator section showed good agreement with a maximum difference of 16%.

دراسة عملية ونظرية للأداء الحراري لمنظومة السيفون الحراري باستخدام موائع عمل مختلفة. حيث تم استخدام ثلاثة سوائل عمل وهي الماء والميثانول والإيثانول في هذه الدراسة. يتكون السيفون الحراري من أربعة أجزاء رئيسة جزيئين رئيسين هما المبخر والمكثف ومرتبطة مع بعضها بواسطة خطين من الأنابيب (خط لنقل البخار والأخر للسائل) ومائع التشغيل المستخدم في المنظومة يعود الى المبخر بواسطة الجاذبية بدون استخدام أي مضخة. أن نسبة الشحن المستخدمة للمائع 50%، 75% و100% وتعتبر عامل أساسي ومهم في هذه التجربة، مقدار الطاقة المسلطة من المصدر الكهربائي على منطقة المبخر تتراوح ما بين 215 الى 860.2 واط. تم وضع ثمانية ثرمو كبلات في مناطق مختلفة من الثرموسايفون لقياس درجة حرارة الجدار للأجزاء الرئيسية في حالة المستقرة غير معتمدة على الزمن. الدراسة النظرية تتمثل باستخدام نموذج نظري لحساب قيم معامل انتقال الحرارة للموائع الثلاثة من خلال برنامج الحل للمسائل الهندسية ( (EESوهذه القيم تم مقارنتها مع القيم العملية. أظهرت النتائج أن معامل انتقال الحرارة يكون بالقيمه العظمى عند استخدام الماء النقي كمائع عمل واقل قيمة له في الميثانول. بالإضافة إلى ذلك تم مقارنة النتائج العملية لمعامل الانتقال الحراري مع القيم النظرية ووجد أنها مقبولة مع اعلى فرق يصل الى من 16%.} }