TY - JOUR ID - TI - Membrane Distillation Technology Using for Desalination of Associated Oil Water Production and Study Efficiency of Feed Water Operation Parameter on Air Gap Membrane Distillation Process Production استخدام تقنيات اغشية التقطير في عمليات تحلية المياه المصاحبة للنفط ودراسة المؤثرات التشغيلية للمياه المغذية على انتاجية وحدات التقطير بالاغشية ذات الفجوة الهوائية AU - Safaa Abdul Ghany Alfaez صفاء عبد الغني عبد الزهرة PY - 2022 VL - IS - 34-part 2 SP - E243 EP - E255 JO - Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية SN - 22205381 27101096 AB - In this study; membrane distillation technology using to associated oil water production desalination by air gap membrane distillation unit to removed salt from the water after separating oil product, via PTEF commercial hydrophobic membrane distillation with 0.22 µm porous and 0.011 m contact surface area, evaluated the desalination system and operation parameter for feed water effected on process production by employment the distillation under boiling point temperature that getting commercial increments and study the energy gain by calculating the GOR of the desalination process.The study focusing on the air gap membrane distillation desalination process by a range of temperature after primary simple sedimentation and filtration it's obtained salt rejection up to 98.9% that proves process separation efficiency. Evaluated the mean operation parameters of feed water affected on permeate water production when selected the feed temperature and flow rate with fixed coolant temperature, coolant flow rate, and air gap width to get an optimum range for feed water operation parameter to obtain optimum value to permeate water production and saving energy

في هذه الدراسة تم استخدام تقنية اغشية التقطير لتحلية الماء المصاحب لانتاج النفط في حقول البصرة حيث استخدم وحدة التقطير بالأغشية من نوع الفجوة الهوائية AGMD لازالة الاملاح من الماء المصاحب الناتج بعد عملية عزل النفط المنتج , بواسطة غشاء كاره للماء تجاري من نوعPTEF ذي مسامات بحجم 0.22 µm و بمساحة تلامس سطحية 0.011 m و تقييم نظام ألتحلية والعوامل التشغيلة للماء المغذي المؤثرة على انتاجية العملية حيث يتم التقطير بدرجة حرارة اقل من درجة الغليان التي تمثل احد المكاسب الاقتصادية ودراسة الربح بالطاقة عن طريق حساب GOR للعملية التحلية. تم التركيز على دراسة عملية التحلية بوحدة غشاء التقطير ذو الفجوة الهوائية بمدى من درجات الحرارة بعد عمليات تركيد و ترشيح اولي حيث تم الحصول على نسبة عزل للملاح تصل الى اكثر من 98.9% مما بيبن كفاءة لعملية الفصل. و دراسة اهم المؤثرات التشغيلية للمياه المغذية على كمية الماء الناتج حيث تم اختيار درجة حرارة الماء المغذي و معدل تدفقه مع تثبيت درجة حرارة ماء التبريد و معدل تدفقه اضافة الى سمك الفجوة الهوائية بين الغشاء و سطح التبريد و ليتم تحديد افضل حدود المتغيرات التشغيلية للماء المغذي للحصول على افضل تدفق للماء الناتج و توفير بالطاقة ER -